The "Post Your Wheel Setup" Thread

[Gt4]

Just finished my CCW Classic with matte silver faces and gold titanium hardware. 21lbs for 18x9.5 et32

They are going to be the track wheels with 265/35/18 Hankook RS4

[BortBortBort]

Square setup 18x9.5 ET22 Titan TS7 on 275/35 V30.

[405]

Looks great, any issues with rear inner tub rubbing with that width and offset?

Thanks!
No issues from what I remember. I didn’t do any fender mods on that car at all.

[JohnM575]

Before the LSB above I had this Imola Red on CCW C14. This was around 2011/2012ish when I was a regular contributor on the old M3forum (RIP)

-CCW C14 18x9.5 +35 (F) 18x10.5 +32 (R)
-Hankook R-S3 265/35/28 (F) 285/35/18 (R)
-+5mm ECS spacers (F)

Looks great, any issues with rear inner tub rubbing with that width and offset?

[tnord]

they remind me of the old OZ superleggera

[elrichmeister]

Before the LSB above I had this Imola Red on CCW C14. This was around 2011/2012ish when I was a regular contributor on the old M3forum (RIP)

-CCW C14 18x9.5 +35 (F) 18x10.5 +32 (R)
-Hankook R-S3 265/35/28 (F) 285/35/18 (R)
-+5mm ECS spacers (F)

I kinda dig those wheels, not a common wheel on a e46.

[405]

Before the LSB above I had this Imola Red on CCW C14. This was around 2011/2012ish when I was a regular contributor on the old M3forum (RIP)

-CCW C14 18x9.5 +35 (F) 18x10.5 +32 (R)
-Hankook R-S3 265/35/28 (F) 285/35/18 (R)
-+5mm ECS spacers (F)

[405]

My old LSB E46 M3 on BBS CH, no spacers.

[405]

I recall this being a 200 some page thread on m3forum and I would browse it for inspo occasionally, so let's re-ignite this favorite pastime for many of us.

I'll start with my very vanilla looking build so far. OEM ZCP's with a 12mm front spacer, 15mm rear. Stock tire size.

The perfect look! Nice.

[Liverpoolreds8]

I like this. I have stock Style 67 19" and was going to replace them but NLA. Looks like 219s are still available. Will they clear the competition front rotors with stock calipers? From Real OEM the front 219s are 29 offset compared to 47 on the 67s; does this present problems or require certain tire sizes?

Pretty sure I've seen people run the 996 calipers and ZCP rotors with a small spacer. I think you'd be fine


Sent from my iPhone using Tapatalk

[PSUEng]

Went for the OEM +#%*$ look with the 219Ms


Sent from my iPhone using Tapatalk

I like this. I have stock Style 67 19" and was going to replace them but NLA. Looks like 219s are still available. Will they clear the competition front rotors with stock calipers? From Real OEM the front 219s are 29 offset compared to 47 on the 67s; does this present problems or require certain tire sizes?

[sbay]

18x9.5 et 22 square no spacers 265/35/18

[Liverpoolreds8]

Went for the OEM +#%*$ look with the 219Ms


Sent from my iPhone using Tapatalk

[adr_M3]

I'm with you! I had to buy two sets to get one and if they pop up on FB, I still think about buying them.

I wasn't a fan of the 18" style 67s until I saw an OEM set at a meetup last week in near mint condition and marveled at the chrome shadow finish. My 02' had a set that were already shot to hell when I bought the car and knowing nothing about what the period correct finish was supposed to be at the time, had them powder coated with a matte grey finish. I grew to loathe them and threw on a set of ZCP wheels as a replacement.

[RockyMtnM3]

Anyone else think the stock 18s are perfection? A shame there's not a good way to source new ones.

I'm with you! I had to buy two sets to get one and if they pop up on FB, I still think about buying them.