BaT E46 LSB M3

[JA_E46M3]

Sweet Ass Door panels, that's on my to-do list one day..

[ra2fanatic]

As in garage queen? Noooooooooooooooooooooooooooooo................... ..........

Yep. Garage queen. I think I’m content with where she’s at now. I think I’m practically touched all that I wanted. Maybe engine down the line but it screams now with the euro headers.

Another project car is stuck in Colorado. Should be here tomorrow supposedly.

[oceansize]

After that, I'm retiring her to the garage.

As in garage queen? Noooooooooooooooooooooooooooooo................... ..........

[ra2fanatic]

Karbonius door panels and handles came in. Quality is freakin' sweeeeet

[ra2fanatic]

Well, Karbonius door panels are on the way. Should be here next Thursday. Dropped off the M3 to EAS tomorrow to figure out some electrical gremlin causing my gauge to not function...really annoyed after relocating the mirror switch to the Karbonius CSL center console.

Gotta install new rear window motors and new seat belts. After that, I'm retiring her to the garage. I am satisfied with all that I've done and off to working on the next car.!

[ra2fanatic]

I have the regular armrest, but I'm considering replacing a bunch of these interior trim bits before they become NLA. My car gets used on multi-hour road trips so I'm not sure if I want to eliminate the arm rest or not.

Honestly don’t recall it ever bothering me but again I never had the armrest to start with either. Maybe it’d other your passenger more? Idk, my wife rarely sits on my E46 anyways!

[tnord]

I have the regular armrest, but I'm considering replacing a bunch of these interior trim bits before they become NLA. My car gets used on multi-hour road trips so I'm not sure if I want to eliminate the arm rest or not.

[ra2fanatic]

I'm curious how the CF "feels" resting your arm on it? Does it feel solid, sturdy, and secure, or is there any flex and give to it? I'm guessing it's well built and solid, but that's what I would be concerned about beyond looking awesome.

Feels fine. But if you have had time with a euro armrest you barely rest anything on that also since it’s so low, lacking the armrest anyway. That was how I bought it so having no armrest was no different. It’s solid with no flex and now...no cup holders but seeing as this is not much of a daily for me anyways it doesn’t bother me. There are other cars in the house to grab drinks in

[tnord]

I'm curious how the CF "feels" resting your arm on it? Does it feel solid, sturdy, and secure, or is there any flex and give to it? I'm guessing it's well built and solid, but that's what I would be concerned about beyond looking awesome.

[ra2fanatic]

Karbonius CSL center console is in. Just have to tidy up the wiring and it's good to go. Running wires through the grommet was probably the only major challenge, but beyond that, pretty straight forward.

[ra2fanatic]

what’s the benefit of these vs OE?

bushing easily replaceable and less likely to tear obviously. The additional spacers they come with help with adjusting the exhaust position as well. Left side was touching my diffuser and the spacer helped clear that so it doesn't rattle and wear away the carbon.

[02_lsb]

Rogue came out with some nice exhaust hangers with spacers and gotta say they are fantastic. Pricey, sure, but solid piece over OE

what’s the benefit of these vs OE?

[ra2fanatic]

Rogue came out with some nice exhaust hangers with spacers and gotta say they are fantastic. Pricey, sure, but solid piece over OE

[DropTopKingM3]

All right, lets try this again...Karbonius center console!!!

Great job bro. Keep up the fine modding!

[heinzboehmer]

Wow that was fast. Nice