Announcement
Collapse
No announcement yet.
Bad master cylinder?
Collapse
X
-
Worth mentioning I replaced a booster and MC in the troubleshooting process. The sound went away for ~60 miles, only to return as I was pulling up to Limerock Park for a track day!
- Likes 1
-
I continue to use the car and try to ignore the sound if/when I hear it. Whatever it is, I've learned to compensate for it. A very experienced instructor drove my car with me on track this weekend and had nothing but good things to say about my setup. Data from my aftermarket brake pressure sensor indicates the system is working properly. (I purchased the sensor from Morehead Speedworks, installed myself, with a fluid flush at a local race shop that specializes in BMW)
Leave a comment:
-
I never resolved the issue. I've bled over 8 liters of brake fluid through the system in various ways but ultimately just needed up living with it. Please let us know if you resolve it.Originally posted by OldRanger View Post
Kdubski - what did you ever determine related to that noise you recorded (back in 2021...sorry for digging this up). My system is doing that after some work I did that resulted in an empty reservoir (I added a brake pressure sensor on my MK60 systems). I don't recall that noise prior to the work.
My brakes work OK, but they feel a bit different. A softer pedal and perhaps a bit less max pressure.
Leave a comment:
-
I recently replaced the pressure sensors and tried not to disconnect lines as much as possible...I still had to disconnect a few. Bleeding the air out of abs/dsc was a real pain, I had to do around 5 rounds (via INPA) after driving it a few times. I got most of it out, but first half inch of pedal stroke still feels a bit soft.
Sent from my SM-S911U1 using Tapatalk
Leave a comment:
-
Kdubski - what did you ever determine related to that noise you recorded (back in 2021...sorry for digging this up). My system is doing that after some work I did that resulted in an empty reservoir (I added a brake pressure sensor on my MK60 systems). I don't recall that noise prior to the work.Originally posted by Kdubski View Post
Ill add that to the list of things to check. One thing I noticed is that the brake fluid gets unbelievably dirty quickly in the MC reservoir.
My brakes work OK, but they feel a bit different. A softer pedal and perhaps a bit less max pressure.
Leave a comment:
-
Just sounds like the vaccum air in the booster that builds up.Originally posted by Kdubski View Post
With engine off sound happens until pedal firms up. It doesn't happen with light smooth braking, it happens with heavier pedal pressure. I.e) pump the pedal fast a few times.
Smoke test was clean!
Leave a comment:
-
Ill add that to the list of things to check. One thing I noticed is that the brake fluid gets unbelievably dirty quickly in the MC reservoir.Originally posted by bigjae46 View PostThat sounds weird. Are you sure the check valve and solenoid are in good shape and not leaking?
Sent from my iPhone using Tapatalk
Leave a comment:
-
With engine off sound happens until pedal firms up. It doesn't happen with light smooth braking, it happens with heavier pedal pressure. I.e) pump the pedal fast a few times.Originally posted by eacmen View Post
Sound happens no matter how many times you pump the pedal with engine off?
Would recommend checking for vac leak before and after check valve. Smoke test it.
Smoke test was clean!
Leave a comment:
-
Sound happens no matter how many times you pump the pedal with engine off?Originally posted by Kdubski View PostUpdate.... replaced MC & Booster... sound returned roughly 250 miles following install, same way it originally came on. Anyone else deal with a brake/MC issue following engine rebuild/install?
Would recommend checking for vac leak before and after check valve. Smoke test it.
Leave a comment:
-
That sounds weird. Are you sure the check valve and solenoid are in good shape and not leaking?
Sent from my iPhone using Tapatalk
Leave a comment:
-
Update.... replaced MC & Booster... sound returned roughly 250 miles following install, same way it originally came on. Anyone else deal with a brake/MC issue following engine rebuild/install?
Leave a comment:
-
Hey sorry. Not super active. I never changed my cylinder out as my brakes magically fixed themselves. Your video sounds like air leaking past the brake booster but get a second opinion for sure. I did end up buying a used MC + brake booster with 80k miles if you want. I have no use for it anymore.Originally posted by Kdubski View PostAny update?
Leave a comment:

Leave a comment: