Interest in Schrick Cams GB?

[Epoustouflant]

There will never be another group buy posted on NAM3 because of Tbonem3. For more info, visit euroconnex.co.

[Cubieman]

Quite likely, would it be a 20 piece requirement? Also, would we be able to get a discount on the DLC followers that most people seem to get with those cams?

[Epoustouflant]

I can get Schrick cams, valve springs kit and titanium retainers all in one package.

I don’t think we’d need 20 pcs, we may be able to do a S54/65/85 all inclusive GB.

[Lip]

I’m in for 280/272

[Sharocks]

I could use newer cams. I got over 100k on mine and they're wearing. Add me to this list lol

288/280s

[repoman89]

Hate to beat this dead horse but ... are new rocker arms required for these? Last I remember reading people recommend new ones for 288/280 but not necessarily for 280/272. The Turner page says they’re recommended for both. Mine only have 45k miles on them.

[Sharocks]

Hate to beat this dead horse but ... are new rocker arms required for these? Last I remember reading people recommend new ones for 288/280 but not necessarily for 280/272. The Turner page says they’re recommended for both. Mine only have 45k miles on them.

Not really, you can do it for piece of mind. I've never seen a stock rocker arm break.

[Obioban]

FWIW for people considering it, I'm at 60,000 miles on my Schricks now (280/272), and ~160,000 on the followers-- no wear issues as of yet.

With tracking and a 8200rpm redline.

[Randall921]

FWIW for people considering it, I'm at 60,000 miles on my Schricks now (280/272), and ~160,000 on the followers-- no wear issues as of yet.

Stock followers?

[empty]

Hey guys,

I have been in talks with Arne @ Schrick AVL GmbH for a group buy on 292 camshaft kits for the S65.

I could loop in S54 cams. We're looking at 30% discount off MSRP.

Is there interest?

Interested


Sent from my iPhone using Tapatalk

[Epoustouflant]

Let’s start a list!

I’ll ask for pricing from Arne.

[BigRussia]

Excellent timing, as Im looking into possible headgasket replacement, Ive been thinking maybe throwing some 280/272 or 288/280 std lift cams while the head is out anyway with all the work! lol

I'd be interested at a 30% discount on either of those profiles

(btw for those wondering about new followers, apparently not always need to replace, only if your stock/factory ones are worn, but can reuse if if good condition from my researching)

[Obioban]

Stock followers?

Yes.

[avusblue]

Interested


Sent from my iPhone using Tapatalk

[BOOSTED]

Interested