Vincebar Group Buy 2021

[Slideways]

Interested in the Simplified Weld in + Tooling kit. - (USA-Nebraska)

Updated

Group Buy List:
1) Slideways (CA) - Epoxy/Rivet Vincebar
2) Zzyzx85 (CA) - Weld Vincebar (might need tool kit. will verify with my guy)
3) jlmotorwerks (WA) - Epoxy/Rivet + Tooling Kit
4) ej257 (NE) - Weld-in + Tooling Kit

[ej257]

Interested in the Simplified Weld in + Tooling kit. - (USA-Nebraska)

[zzyzx85]

Funny. I was just thinking about this.

Group Buy List:
1) Slideways (CA) - Epoxy/Rivet Vincebar
2) Zzyzx85 (CA) - Weld Vincebar (might need tool kit. will verify with my guy)

[jlmotorwerks]

I’m interested in a simplified epoxy/rivet kit plus the tooling kit.

[JamesSJ1]

Can verts utilize the Vince bar yet?

A couple months back I was messaging with Vince about this, and at the time the front cups (included in this group buy from the pictures) were not convertible compatible. He still needed a donor convertible to design something, but you could also just use the bar and strengthen that area.

[keljos]

Both "simplified" and "stealth" are hidden below the trunk floor mat, so neither can be seen when installed with the floor mat in place and you still retain all the trunk space. The "simplified" is a slightly stronger bar than the "stealth" even though both work just fine. It also looks like it is a bit easier for Vince to manufacture the "simplified" version, which is why I am thinking those are the only options available in the GB. I believe the last GB was in 2017, so they don't happen often.

Got it, thanks for the clarification! I'm interested, although I need to determine where i'll get this installed in my area and whether or not they're willing/able to do the weld in kit vs the epoxy/rivot as this is beyond my capabilities.

[Slideways]

I don't have facebook and am having trouble getting an answer to this question off the page, perhaps you guys can help me with this. How significant is the difference between the stealth and "simplified" versions? My main concern is retaining as much space within the trunk as possible after installation. With that as a goal, would it be a reasonable bet to try and hold off for another run of stealth bars?

Both "simplified" and "stealth" are hidden below the trunk floor mat, so neither can be seen when installed with the floor mat in place and you still retain all the trunk space. The "simplified" is a slightly stronger bar than the "stealth" even though both work just fine. It also looks like it is a bit easier for Vince to manufacture the "simplified" version, which is why I am thinking those are the only options available in the GB. I believe the last GB was in 2017, so they don't happen often.

[keljos]

I don't have facebook and am having trouble getting an answer to this question off the page, perhaps you guys can help me with this. How significant is the difference between the stealth and "simplified" versions? My main concern is retaining as much space within the trunk as possible after installation. With that as a goal, would it be a reasonable bet to try and hold off for another run of stealth bars?

[WestBankM4]

Of course you guys run this now, I just got my epoxy/rivet kit a couple weeks ago! It's a great piece, haven't installed it yet but it looks great.

Sent from my Pixel 5 using Tapatalk

[Epsilon]

Think Vince would offer just the front gusset cups w/tooling kit? I'm thinking of going with an x-brace in the rear.

[Slideways]

Can verts utilize the Vince bar yet?

I emailed him about this and also double checking fitment for sedans and wagons.

[Slideways]

Are the stealth kits available? I am interested in simplified as well

Yeah, only the "simplified" versions are available for the GB as of now.

[Hallerhan]

Can verts utilize the Vince bar yet?

[Cubieman]

Are the stealth kits available? I am interested in simplified as well

[Slideways]

Updated (3/31) GB List:

1) Slideways (CA) - Epoxy/Rivet Vincebar
2) jlmotorwerks (WA) - Epoxy/Rivet + Tooling Kit
3) ej257 (NE) - Epoxy/Rivet kit + Tooling Kit
4) Bimmerrodg (montreal,Canada) epoxy/rivet + tool kit
5) BoostedBoobs (Toronto, Canada) Weld-in kit
6) EthanolTurbo (CA) - Vincebar
7) bran.stum (CA) - Weld in kit, might need tool kit as well. I’ll verify
8) K-Dawg (FL) - Epoxy/rivet kit + tooling kit (+ VinceSkinz)
9) simonnim (CA) - Epoxy/rivet + tooling kit
10) hallerhan (PA) - Epoxy/Rivet + tooling kit
11) SQ13 (TX) - Epoxy/Rivet + Tool Kit
12) SQ13 (TX) - Epoxy/Rivet
13) cmitch024 (TX) - Epoxy/rivet kit + tooling kit
14) kenster (CA) - Weld-in
15) Monte (OR) - Epoxy/Rivet Vincebar
16) M3kid (FL) - Epoxy/Rivet Vincebar + Tooling kit
17) Tom Day (IL) - Epoxy/Rivet Vincebar
18) E46Envyy (Toronto, Canada) Epoxy/rivet kit + tooling kit
19) big,JON (Australia) - TBC + tooling kit
20) Jsottile - Epoxy/rivet + tooling kit
21) ericthehalfabee (NV) - Epoxy/rivet + tooling kit
22) white_335i - Epoxy/rivet + tooling kit
23) Zekarus (Germany) - epoxy/rivet vincebar + tooling kit (+ vinceskinz)
24) Will (CA) - epoxy/rivet + tooling kit
25) Vereni - Epoxy/Rivet + tooling kit
26) Epsilon (CA) - Epoxy/Rivet + Tooling Kit
27) D-O (GA) - Tooling Kit for Epoxy/Rivet + VinceSkinz
28) su45 (IL) - Weld-in
29) hsq (CA) - Weld-in kit
30) CheckA (AZ) - Epoxy/Rivet + Tooling Kit
31) Cubieman (NE) Epoxy/Rivet + Tooling Kit
32) Kermmmit7 (IL) weld-in kit and tooling kit
33) Stoff (TX) - Epoxy/Rivet, tbd tooling kit
34) Trudriv3r (NJ) Epoxy/Rivet + Tooling Kit