The Phoenix: My Build Journal Excerpts

[Maxima SE]

Oh he got banned ?

[Chas3n]

120x CSL bumpers at 2,500$ is hardly limited.

What is your definition of limited?

I've owned watches that cost far more and made in “limited” numbers exceeding 120 by x4.. they all seemed very limited to the watch community


Sent from my iPhone using Tapatalk Pro

[0-60motorsports]

120x CSL bumpers at 2,500$ is hardly limited.

Really? The rep I was referred to told me 20. Maybe it was typo or maybe he was speaking about the twin intake bumper. Thanks for clearing that up.

[Epoustouflant]

Bahahhahahaha ok….. I'll play

Get the deal from Vorsteiner directly if you want their parts which I know you don't.

They are limiting the production of the parts so it's pointless for me to try and do a GB with that quantity available and with that little of quantity the discount was so less I just didn't take the conversation forward or to anyone higher up at Vorst.

120x CSL bumpers at 2,500$ is hardly limited.

[0-60motorsports]

Bahahhahahaha ok….. I'll play

Get the deal from Vorsteiner directly if you want their parts which I know you don't.

They are limiting the production of the parts so it's pointless for me to try and do a GB with that quantity available and with that little of quantity the discount was so less I just didn't take the conversation forward or to anyone higher up at Vorst.

[Epoustouflant]

That'll look good with the wheels once the height etc. is all set.

Should be fine.

Where and why did you bring up the Vorsteiner GB from?

I was hoping to get deals.

Whatever it is I'm going to get you guys hooked up if it happens! BIG TRY lol

Ah ok, you'll chat to them about what exactly? About GBing if it meets your hype expectations?

We ended up chatting over the phone about how small this market is.

[0-60motorsports]

No, they are now the same. We're still not at M3 V8 offsets of fenders.

Are Vorsteiner group buys happening btw?

That'll look good with the wheels once the height etc. is all set.

Where and why did you bring up the Vorsteiner GB from?

[Epoustouflant]

I can see what wheels it has on and the camera lens angle etc. My question remains, is the front of the car Now wider than the Rear Fender edges?

No, they are now the same. We're still not at M3 V8 offsets of fenders.

Are Vorsteiner group buys happening btw?

[0-60motorsports]

The pic is taken with a 16mm fish eye lens and the front have a 19x9.5J ET-7 while the rears are on 19x8.0+47.

I can see what wheels it has on and the camera lens angle etc. My question remains, is the front of the car Now wider than the Rear Fender edges?

[Epoustouflant]

In this pic the front fenders look like they are poking out and the car is appearing wider in the front compared to the rear? Can you confirm if the front is now wider than the rear?

The pic is taken with a 16mm fish eye lens and the front have a 19x9.5J ET-7 while the rears are on 19x8.0+47.

[0-60motorsports]

Continued work on test fitment as the prototype forged CSL style wheels are incoming!

I fiddled with height, a bit more, both sides now have the same camber and height settings. Driver side is 30mm, Passenger side is 20mm. It's much more aligned with my final planned specs.

I'm working on a slew of entries on the carbon doors, subframe reinforcement, CSL trunk fitment, and more.

In this pic the front fenders look like they are poking out and the car is appearing wider in the front compared to the rear? Can you confirm if the front is now wider than the rear?

[Epoustouflant]

Then put it in the proper section. It's in the main section so I'll post as I please.

For as much as you think my mere existence is responsible for your bullshit passive-aggressive-bitch-ass attitude, I unfortunately don't have the power to move threads. I also don't think this would solve anything.

[Tbonem3]

Then put it in the proper section. It's in the main section so I'll post as I please.

[Epoustouflant]

Super cool restoration. And i will be alone here, but those wheels just look off place, it makes the car look wrong.

I agree! I was exploring the most aggressive fitments to document for those that care little about aesthetics and want to maximize tires under the fender. The forged set that's incoming is less aggressive, and will run slightly smaller overall diameter

You are not alone lol. Fenders look like a caricature drawing of an e46 m3.

I won't even pretend - please stay out of my build thread if you'll contribute nothing but your usual negative nagging.

[Tbonem3]

You are not alone lol. Fenders look like a caricature drawing of an e46 m3.