Announcement

Collapse
No announcement yet.

KhanArt's Jet Black///Cinnamon 6spd E46 M3 build journal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • KhanArt
    replied
    Update (4/12/2014) Hit 55k today


    Leave a comment:


  • KhanArt
    replied
    Update (4/5/2014) Amber film on OEM LED tail lights

    Let's just say for the price I paid I'm not going to complain. But later in the future I may purchase amber LED tails if a good deal comes up either that or give the film another try since I have enough left over to do it again.

    Before


    After




    Amber Corners and Sidemarkers

    Leave a comment:


  • KhanArt
    replied
    Update (3/28/2014) OEM Amber corners and sidemarkers

    I thought I give the ambers a try. I still have my clear and smoke set so I can switch at any time. It's different but I like it, I think it goes well with the cinnamon interior. I will be needing amber LED tail lights soon.



    Leave a comment:


  • KhanArt
    replied
    Update (3/16/2014) CPI High Airflow Air Filter

    I got a new air filter from Custom Performance. Didn't take a pic, website shot will have to do.

    Leave a comment:


  • KhanArt
    replied
    Minor Update (2/17/2014) Misc OEM Parts

    My quest continues to restore this car to OEM Plus status. Picked up a few parts which I probably didn't need but the cost wasn't great so I replaced them.

    Cabin Filter Cover New on top old on bottom




    Hood Grille New on top old on bottom



    Key Emblems



    Really hoping for winter to be over soon so I can have some real updates on here.

    Leave a comment:


  • KhanArt
    replied
    Update (1/19/2014) BW Intake Elbow and TTFS AIT Relocation Kit

    This will have to do until I get a CF airbox

    BimmerWorld Intake Elbow

    Stock Vs. BW



    Installed (Crappy pic)



    Tuning Tech Frank Smith AIT Relocation Kit





    *I am not expecting any gains from these modifications

    Leave a comment:


  • KhanArt
    replied
    Update (1/5/2014) Coby Alcantara Shift and E-Brake Boots

    I just installed the Coby black alcantara tri M stitch shift and e-brake boots. Love them!







    Next is the wheel, with blue track attack stripe or not??

    Leave a comment:


  • KhanArt
    replied
    Update (1/4/2014) M3F Member Calendar

    Got 2 of the M3F member calendars in the mail today. One for my office and one for the wife. I need to submit my pictures to this next year :taser:



    I also removed some stickers I had on my car today that were on from a show I went to last year.. automatic 5whp loss :shifty:

    Leave a comment:


  • KhanArt
    replied
    Update (1/1/2014) Headlight Lens and Fuel Filter

    Not the best picture :facepalm: but there is a big difference. I highly recommend changing the lens out. Looks really fresh and new now.

    Old (Top) New (Bottom)



    I also changed the fuel filter. Makes me really wish I had a lift every time I have to work under the car..

    Filter Out



    New Filter



    Good DIY video of fuel filter replacement:

    MClub.LA DIY Library: BMW E46 M3 Fuel Filter Change - YouTube

    Leave a comment:


  • KhanArt
    replied
    Update (12/28/2013) Upper Timing Chain Guide

    I purchased these upper timing chain guides a little while back after I found out that these are a common failure on our cars. Too bad I discovered this after I already had my Beisan fixes/Hub repair.



    Well I finally got around to having it installed and what do you know mine was broken at 53k miles, who knows when it actually broke. Hopefully I can put my vanos worries away for now.




    Also I have little odds and ends (maintenance items/refresher items/mods) stacking up that I need to get installed. Hopefully I will have some time in the near future to install everything and have some more updates.

    Leave a comment:


  • KhanArt
    replied
    Update (12/21/2013) Oil Change, Vanos Filter, MAF Sensor Cleaned

    I found a little time this weekend to get started on the parts/items I had stacking up.

    I was able to complete:

    Oil Change





    Vanos Filter

    Before


    After


    Clean MAF Sensor



    Hopefully on my next day off I can do the fuel filter and put my new headlight lenses in.

    Leave a comment:


  • KhanArt
    replied
    Update (12/20/2013) Misc Parts/Items

    This thread needs an update...

    Bought some parts/items and hope to knock all if not most of this out this weekend.



    Oil, oil filter, drain plug, o rings, vanos filter kit, SAP block off plate



    CPV O rings from member Mpower22, M stripes from member Rovert, fuel filter, headlight lens



    Not sure if I will do the SAP delete, CPV O ring, and M stripes this weekend but would like to get the rest done.

    Leave a comment:


  • KhanArt
    replied
    Update (10/26/2013) Misc Pictures

    Some pics of those bad boy Active headers hiding back there. I would do the SAP delete now but don't want the CEL light, so I will wait until I can make it over to Frank's. Need to order the block off plate too.




    Some random pics of my garage.. it's no Doctor Evil garage but it's a work in progress.






    Wheels are for sale BTW.. OEM 19's powder coated Gloss Black no rash at all


    Picked up 2 upper timing chain tensioner guides for myself and Dave. Will change this next time I have her all open.. since these seem to be a common failure.

    Leave a comment:


  • KhanArt
    replied
    Update (10/19/2013) Trans Fluid and Header Install :clap:

    Had access to a lift so I wanted to get my trans fluid out of the way while doing other work. I'm kicking myself for not getting a fuel filter in time. Used the BMW MTF LT2. Very easy job if you have a lift and breaker bar.

    MTF Fluid Change DIY:


    MTF LT2


    Drain and Fill plugs Removed Sorry for the crappy cell phone pics, left the DSLR in the car that was up on the lift :facepalm:


    I got myself a set of Active Autowerke CSL rep headers. These things are beautiful! Thick flanged, great fitment, clearances, and good sound. I had a very quiet exhaust setup before but this added some tone and bought some rasp back. I had no rasp at all before. I gained a good amount of hp and tq on the low end. Big thanks as always to Dave for helping me with the headers... actually he did all the work :shifty: I just assisted. And of course big thanks for Frank for always going the extra mile making sure my tune is right and the crack chicken.

    Will take some videos of the sound when I get a chance.


    Headers Removed



    The Freak


    The Headers and Some Hardware






    Installed and Clearance Pics




    Thanks :thumbsup:

    Leave a comment:


  • KhanArt
    replied
    Finally some pics from this weekends Mpact show, aren't the best but you get an idea of the detail job.





    Leave a comment:

Working...
X