Liam821's Phoenix Yellow

[liam821]

Couldn't resist, had to go searching for a pic. Here's my old 2001 PY, which I bought in 2004. Loved that car.

So pretty!

AR is fantastic. They fixed my E30 once when it broke at PIR... wish they were closer to me.

I actually know an E46 M3 guy who trailers his car to and from Portland just to have AR prep it for the track.

Good to know, thanks! Yeah, they're super close to me, 10 miles. I generally do my own alignments on my track car, but I think I'm going to drop it off there and have them track prep it this year. Especially since I found out that my garage floor isn't totally level...

[r4dr]

Thanks! I ordered a new rear spacer and longer wheel studs last night so once I get them i'll post up a picture. I did get the car aligned today, AR Motorsports in Portland did a great job. Car drives and looks so much better now that all the camber is in line.

AR is fantastic. They fixed my E30 once when it broke at PIR... wish they were closer to me.

I actually know an E46 M3 guy who trailers his car to and from Portland just to have AR prep it for the track.

[LeopardM3]

Thanks! It's really a great color.

And yeah, just SS lines by itself is a huge upgrade - really improves the brake feel. I'm sure some of it is our cars are getting to be nearly 20 years old now and those rubber lines are rubber lines after all.. but still, for the cost, a great upgrade!

Couldn't resist, had to go searching for a pic. Here's my old 2001 PY, which I bought in 2004. Loved that car.

[liam821]

Fantastic job, liam821

If you were on the original M3F, you may recall my first M3 was a 2001 PY, and it's still my favorite color by far. Current one is an 06 Mystic Blue, which I absolutely love, but still not as unique as the PY. Also much appreciate the info on the Aston brake calipers, I may do the same! I recently had SS brake lines installed, and HOLY CRAP does it make a world of difference.

Thanks! It's really a great color.

And yeah, just SS lines by itself is a huge upgrade - really improves the brake feel. I'm sure some of it is our cars are getting to be nearly 20 years old now and those rubber lines are rubber lines after all.. but still, for the cost, a great upgrade!

[LeopardM3]

Fantastic job, liam821

If you were on the original M3F, you may recall my first M3 was a 2001 PY, and it's still my favorite color by far. Current one is an 06 Mystic Blue, which I absolutely love, but still not as unique as the PY. Also much appreciate the info on the Aston brake calipers, I may do the same! I recently had SS brake lines installed, and HOLY CRAP does it make a world of difference.

[liam821]

that looks killar.....gonna look even better once you dial in the spacing in the rear!

Thanks! I ordered a new rear spacer and longer wheel studs last night so once I get them i'll post up a picture. I did get the car aligned today, AR Motorsports in Portland did a great job. Car drives and looks so much better now that all the camber is in line.

[antknee]

that looks killar.....gonna look even better once you dial in the spacing in the rear!

[liam821]

Sick! More camber up front needed, no?

It doesn't seem to rub as it is...Although I've only driven it 7 miles since getting the new wheels on. I'm taking it to a local motorsports place here in Portland tomorrow to get a proper alignment done. I'm pretty good at doing my own alignments but I don't really have a proper string setup for the M3 like I do with my Civic.

I'm running a 7" front spring and the height adjustment ring on my suspension rubs right on the tire so I ended up having to use a 12mm front spacer to clear it. I might be able to go down to a 10mm but that's cutting it really close. If I want less poke in the front I'm going to have to either get a smaller front tire or a 6" front spring.

On the rear I'm also running a 12mm spacer but it's not enough and looks funny. I stacked two spacers together just to test fit and 20mm looks perfect with just enough space to squeeze a piece of paper through at full compression so a proper spacer.

That's the bummer part about running a square setup you generally have to run spacers to make it work okay. It would be better off if my wheels were 18x9.5 +28 to start with but this was the only size they made in 18s. I did reach out to see if I could get a custom rear wheel made in 18x10" +22 but no luck. Oh well.

Once I get the alignment all done and fix the rear I'll snap some more pictures.

[Tbonem3]

Sick! More camber up front needed, no?

[Nima5858]

this is a amazing build really enjoyed watching it and looking forward to see the rest

[liam821]

Can’t wait to see this on the ground

Wait no more!

[Bgexpress]

Can’t wait to see this on the ground

[Str8f4c3]

Those wheels look absolutely killer! That JDM 5 Spoke looks great on the m3.

[liam821]

Are those wheels 9.5 squared?
Love the calipers and wheel combo.

Thanks, and yeah, 18x9.5" squared with 265/35R18s all around. I just had the tires fitted yesterday.

Just waiting on a spacer that comes tomorrow and it can finally go back down on its wheels.


All finished


And the boot floor put back together

[akshon]

Are those wheels 9.5 squared?
Love the calipers and wheel combo.