1M Carbon parts

[Mark CSL]

some better pixs taken outside.

[Mark CSL]

Thats me finnished the ashtray and gear trims in carbon :smokin:

[Mark CSL]

Is it not slow enough without adding more weight :thumbs:

It want be as heavy as me getting in it :hahaha:
Not as slow as the CSL m8 430bhp with a chip and FMIC :thumbs:

not that I don't approve of your handiwork, you've already helped me out once... but covering things in carbon to look like carbon and hence making them heavier kind of goes against the point of carbon does it not? I used to give the Noble guys hell when they had things dipped... I'd feel bad if I didn't at least mention it once.

Then again, it can't be that much extra weight just covering a bit of trim. Looks good :thumbs:

Its for the look its not about saving waight it looks a lot better than black plastic:whistle:

[Chappers]

not that I don't approve of your handiwork, you've already helped me out once... but covering things in carbon to look like carbon and hence making them heavier kind of goes against the point of carbon does it not? I used to give the Noble guys hell when they had things dipped... I'd feel bad if I didn't at least mention it once.

Then again, it can't be that much extra weight just covering a bit of trim. Looks good :thumbs:

[derek]

Is it not slow enough without adding more weight :thumbs:

[Roland]

Looking good mate :thumbs:

+1 :thumbs:

[Bounce]

Looking good mate :thumbs:

[Mark CSL]

Snading agin this time 1500 grit then 2000 grit and polish and install
Just the ashtray gear surround and the cic trim :thumbs:

[Mark CSL]

Then its time for the 2k clear.

[Mark CSL]

Another coat of resin then sand down again with 800grit wet and dry.
(No finger prints left) :bigcry:

[Mark CSL]

More coats for resin then trim the excess carbon sand the parts down and more resin.

[Mark CSL]

After the resin goes tacky around 4 hours the carbon is put on and then the parts are put in a vacuum bag for another 6 hours.
Then they are taken out the vacuum bag.

[Mark CSL]

Well the 1M was needing a little Carbon just so i could feel at home
:whistle:

Radio and Aircon panel

Got new trims from bmw as they are cheap and that way i can put the car back to standard if or when i sell it.

Sanded the trims then the resin went on