DIY ABS Bleed?

[bigjae46]

Interesting. So you actually empty the reservoir first then bleed the old fluid out through the lines? What are you using to empty the reservoir?

A vacuum bleeder or an ear syringe

[TACOM3EAT]

I don't think this is necessary for a track car. The ABS gets activated quite often which does the same thing as activating it through a diagnostic program.

The brake fluid doesn't really circulate. If you're doing brake bleeds on a track car, all you need to do is empty/refill the reservoir and then bleed what's in the caliper and brake hoses. I use about .5L when doing a bleed on my track car. This assumes the brakes are being bled twice a year.

Interesting. So you actually empty the reservoir first then bleed the old fluid out through the lines? What are you using to empty the reservoir?

[bigjae46]

I don't think this is necessary for a track car. The ABS gets activated quite often which does the same thing as activating it through a diagnostic program.

The brake fluid doesn't really circulate. If you're doing brake bleeds on a track car, all you need to do is empty/refill the reservoir and then bleed what's in the caliper and brake hoses. I use about .5L when doing a bleed on my track car. This assumes the brakes are being bled twice a year.

[TACOM3EAT]

Thanks Tbone. This one? Seems easier than installing software to me

[Tbonem3]

Yes, I use the schwaben tool, but there is software you could use on a computer (dis? Inpa?) That will activate abs at each corner while you bleed.

[TACOM3EAT]

I've been doing DIY brake fluid flushes using a power bleeder, but I know when I do that I'm missing the ABS bleed process.

Is there an easy way to DIY the ABS bleed in a home garage?

Mac user FWIW