Anybody not running swaybars at all? I've never run a rear one on my E46s I've tracked but now the M3 is getting the Bimmerworld d splitter and it won't fit with the ground control front swaybar. I've talked with bimmerworld about not running a bar and they recommended at a minimum my spring rates would need to increase by 100lbs. I'm currently running 750 front 900 rear on MCS 3 ways. I'm just curious if anyone has any experience with a barless setup? Ordering the bimmerworld front swaybar is an option however I'm currently leaning towards going without a front bar. I'm going to tack the car in a month without a bar at NCM and then have another discussion with Bimmerworld.
-
-
Which splitter is that? I’ve never considered the sway bar getting in the way.
I run no rear bar and I didn’t change spring rates. Also didn’t change spring rates much with aero. I increased the front spring rate by 50lbs to reduce splitter scraping.
Let me know if you plan to sell your GC front sway bar.
-
The bimmerworld front splitter that's always out of stock, so I don't think they've sold many of them. I was shocked they didn't warn me before purchase
Will do on the swaybar.Comment
Comment