Breaks my heart to post this car up, but i don't drive it much anymore and will be moving soon. I bought this car from the original owner last year. It was pretty much bone stock with typical maintenance over the years when i got it. I did all major maintenance during my ownership and added all the mods that i had from my last M3 on to this one. I spared no expense considering i was going to keep it for a very long time. But Life changes force the sale. I have all service records and both original window stickers.
2004 Alpine white/ Imola red interior
2 owner car, always garaged.
Big 3 done plus tons of other maintenance.
129k miles, Clean and clear title in my name.
Maintenance done during my ownership ~10k miles
Subframe reinforcement (no cracks found but done preventatively) w turner plates
Rear GTR style Mason Brace
New subframe bushings turner solid aluminum bushings
New OEM diff cover
New OEM front mount diff bushing
New Synchro Design works RTABS
New upper and lower trailing arm ball joints
New turner poly 80A FCAB
New OEM rod bearings and bolts
New OEM Engine and transmission mounts
New inner and outer tie rods
New Fuel filter
New OEM shifter bushings
Beisan full vanos overhaul (oil pump disk, strengthened exhaust hub + chain guide tensioner, updated cam bolts and all seals)
New OEM spark plugs
New OEM coil packs
Valve adjustment completed
New OEM valve cover gasket
New OEM cam sensors
New OEM pulley's & belts
Modifications
BBS CH's 19'' with Red BBS center caps wrapped in Michelin PS4 tires (245,275)
Brembo Monoblock BBK (6 piston front, 4 piston rear) 355 rotors rings up front 345 for the rear
Ohlins R&T coilovers
Vorshlag camber plates
ZCP/CSL steering rack (blue tag)
Supersprint V1 headers with race cats in section 1
Karbonius CSL airbox (carbon trumpets) with OEM flap (flap deleted)
Kassell map sensor with CSL tune tuned by Paul Claud
Dinan 3.91 differential
Dinan Throttle bodies
OEM CSL trunk
Vorsteiner CSL diffuser
Status gruppe CSL front bumper w 1 piece lip
Mason aluminum front strut brace
Mason rear GTR style one piece brace
BMW performance SSK with ZHP knob
Vorsteiner CSL center console
Leatherz imola red shift boots
Ledermanz leather steering wheel thickened
Eonon headunit with reverse camera
Custom Manual Seat frames with lumbar support retrofitted professionally
Price: 38k with all mods listed above.
SOLD
Pics below
2004 Alpine white/ Imola red interior
2 owner car, always garaged.
Big 3 done plus tons of other maintenance.
129k miles, Clean and clear title in my name.
Maintenance done during my ownership ~10k miles
Subframe reinforcement (no cracks found but done preventatively) w turner plates
Rear GTR style Mason Brace
New subframe bushings turner solid aluminum bushings
New OEM diff cover
New OEM front mount diff bushing
New Synchro Design works RTABS
New upper and lower trailing arm ball joints
New turner poly 80A FCAB
New OEM rod bearings and bolts
New OEM Engine and transmission mounts
New inner and outer tie rods
New Fuel filter
New OEM shifter bushings
Beisan full vanos overhaul (oil pump disk, strengthened exhaust hub + chain guide tensioner, updated cam bolts and all seals)
New OEM spark plugs
New OEM coil packs
Valve adjustment completed
New OEM valve cover gasket
New OEM cam sensors
New OEM pulley's & belts
Modifications
BBS CH's 19'' with Red BBS center caps wrapped in Michelin PS4 tires (245,275)
Brembo Monoblock BBK (6 piston front, 4 piston rear) 355 rotors rings up front 345 for the rear
Ohlins R&T coilovers
Vorshlag camber plates
ZCP/CSL steering rack (blue tag)
Supersprint V1 headers with race cats in section 1
Karbonius CSL airbox (carbon trumpets) with OEM flap (flap deleted)
Kassell map sensor with CSL tune tuned by Paul Claud
Dinan 3.91 differential
Dinan Throttle bodies
OEM CSL trunk
Vorsteiner CSL diffuser
Status gruppe CSL front bumper w 1 piece lip
Mason aluminum front strut brace
Mason rear GTR style one piece brace
BMW performance SSK with ZHP knob
Vorsteiner CSL center console
Leatherz imola red shift boots
Ledermanz leather steering wheel thickened
Eonon headunit with reverse camera
Custom Manual Seat frames with lumbar support retrofitted professionally
Price: 38k with all mods listed above.
SOLD
Pics below
Comment