UPDATED: ST40 Raybestos and Stoptech race pads for sale

[LSBNick]

WTS: multiple sets of Race Pads for Stoptech ST40s

Recently picked up a set of ST40 trophy’s for my E46 M3 that came with a total of 8 sets of race pads. I have already sold one set of the Raybestos ST43R. Here are the sets I have remaining as follows:

————————————

UPDATE AS OF 1/23/2023 @ 2:05 pm EST

Both new sets of Stoptech SR33 are still available.
$250 a piece SHIPPED within continental US

All Raybestos ST43s have been sold.

————————————

3 x sets of Raybestos ST43R609T16
- 3 sets are brand new, 2 pending payment, 1 left unclaimed.

Can’t seem to find a consistent price on these new or used (I’ve seen between $180-$200 or so)

Selling each new set for $150 shipped, the one used set for $100 shipped.

2 x sets of Stoptech SR33 333.0609.17.0
- Both sets are brand new, retail on ECSTuning is $335

Selling each set at $250 shipped.

Located in Suwanee, GA and will ship anywhere in the continental US.

More pics can be provided upon request, and will consider bundle pricing if buying multiple sets.

Thanks!

PS: ST40s are not for sale

[LSBNick]

Bump

[LSBNick]

Bump

[LSBNick]

Bump

[bigjae46]

You can list these for older Porsche's as well...used the same pad shape. 928/944/968 and a couple years of 911s.

[LSBNick]

You can list these for older Porsche's as well...used the same pad shape. 928/944/968 and a couple years of 911s.

Awesome thanks, had no clue. Any idea what years of 911s ran these? Or what I could search to find that info?

[bigjae46]

The pad shapes are D372/D609. This is what I found...

FMSI D372, D447, D609. Fits:
1994-98 Audi RS2
1994-96 Ferrari 456 GT Coupe Rear
and many Porsche models, including:
1996-98 911 Carrera 4 rear
1991 911 Turbo
1986 928 S
1987-91 928 S4
1990-91 928 GT
1989-91 944 Turbo
1992-95 968 Sport
Also fits the Stoptech ST40 caliper.

I'm pretty sure there is a spec series, not sure if its a 928, 944, or 968.

[Rich022]

sent msg to purchase 2 sets of NEW raybestos. thanks!

[mrgizmo04]

ST40 caliper is an ST40 caliper. Pad shape and size stays the same. Stoptech just changes piston sizes to get the right torque/bias for the different cars, width for the rotors and associated mounting brackets for rotor offsets.

My s2k with ST40 kit and 328x28 rotor takes the same pad as my M3 ST40 kit with 355x32 rotor. Pads are all (mostly) 16.5mm thick, some (rarely) are 17 or 18.

So if you need to move them, you can list them as D609 pads for ST40 calipers and Subaru, VW, Honda, etc boys and girls should take them off your hands.

Sent from my SM-G950U using Tapatalk

[bigjae46]

ST40 caliper is an ST40 caliper. Pad shape and size stays the same. Stoptech just changes piston sizes to get the right torque/bias for the different cars, width for the rotors and associated mounting brackets for rotor offsets.

My s2k with ST40 kit and 328x28 rotor takes the same pad as my M3 ST40 kit with 355x32 rotor. Pads are all (mostly) 16.5mm thick, some (rarely) are 17 or 18.

So if you need to move them, you can list them as D609 pads for ST40 calipers and Subaru, VW, Honda, etc boys and girls should take them off your hands.

Sent from my SM-G950U using Tapatalk

Many years ago I ran into an issue where the pad was too thick. I ran out of pads at the track. The shop had some old Porsche pads. He sanded the pads down a bit and they fit.

One factor about buying a BBK that people ignore is availability and cost of consumable and replacement parts. ST40 is by far the best caliper in that regard. I don’t think you’ll have a good chance of finding a PFC or AP Racing caliper pad in a pinch.

BTW…the Stoptech SR33 race pad is similar to a PFC PF08. I use SR34 pads and they are a PF01 knock off. I’m almost certain PFC makes Stoptech’s race pads.

[LSBNick]

Bump. 1 new set and the single used set of ST43s sold.

2 new sets of Raybestos are pending.

Post will be updated accordingly.

Thanks to everyone who has shared knowledge of these pads and the applicable cars they can go with. I always manage to learn a great deal on here.

[LSBNick]

sent msg to purchase 2 sets of NEW raybestos. thanks!

PM replied to

[LSBNick]

Bump. 2 pending sets sold.

Here is what I have left:

1 x new set of Raybestos ST43 that are pending

2 x new sets of Stoptech SR33 pads.

[LSBNick]

Bump. All Raybestos have been sold.

Stoptech SR33 race pads still available.

2 new sets, $250 each shipped within continental US. Post updated accordingly.

[LSBNick]

Bump.

SR33 still available, both set.

price drop to $225 each