Porsche Cayenne 17Z Calipers Front and Rear w/ Pads

[WestBankM4]

Hello,

Selling these Cayenne 17Z calipers I was planning on using for a reverse engineering project but I decided it's not worth the time and went a different route. Calipers were in working condition when removed, Cayenne had 68K on the odometer but they've been sitting outside.

Looking for $350 shipped.

Or picked up in the Bay Area California for $300.

[fattycharged]

5cyl Audi guys use these as a regular swap, may make sense to post them up on Marketplace

[WestBankM4]

I figured posting them up here was a long shot especially with this crowd, although these calipers are on a few forum cars I've seen.

I'll look to post it up on Marketplace, thank you.

[Cronenberged]

Whays the bias with this set up?

[WestBankM4]

The 17Z bias (~68% to front VS 65% stock E46 M3 non-comp front bias) - based on 362mm front & 355mm rear.

ROTORS: Front 6 piston calipers can fit both the 360x30mm (E9x) rotors and 380x30mm (F8x) rotors.

Front Caliper# BP-601 (34/36/38x32) piston sizes and rotor size is 32mm thick.
Rear Caliper# BP-405 (28/30x32) piston size and rotor size is 32mm thick.
Front Part# 95535142132, 95535142233
Rear Part# 95535242232, 9553524132