WTB: 15mm + 12mm Wheel Spacers

[ChapterM3]

Looking for a set of 15mm and 12mm wheel spacers - With or without with bolts, not interested in studs - Turner, BimmerWorld, H&R, etc.

Wheels are stock 18" Style 67's, looking for flush fitment and believe this is the right setup from research, also open to those with more experience in spacers to chime in if you think I should run different sizes to achieve what I'm going for

Let me know what you have!

[maupineda]

I have a set of 17.5. I think I have the bolts, but would need to check.

[ChapterM3]

I have a set of 17.5. I think I have the bolts, but would need to check.

Debating if that would poke at all instead of the 15mm? Any idea or photos of them on your car?

[maupineda]

Debating if that would poke at all instead of the 15mm? Any idea or photos of them on your car?

Mine is a Z4M which shares the rear axle with the M3. What I have on the car right now is 18mm spacer. the 17.5 is what I had before.

my rear wheels are very mild, 8.5in rim width et37 with a 255 section tire. This translates to a net offset of et 19.

[kenster]

I might have a set, forgot which brand. I'll look over the weekend. I'm local as well

[ChapterM3]

Mine is a Z4M which shares the rear axle with the M3. What I have on the car right now is 18mm spacer. the 17.5 is what I had before.

my rear wheels are very mild, 8.5in rim width et37 with a 255 section tire. This translates to a net offset of et 19.

Great, thanks for the info and similar setup of the rear 18x9 et 26 - thinking about it I’m not sure how the rear would look with a 17.5 and if it would be too much. What brand spacers are they? And what are you looking for price wise?

[ChapterM3]

I might have a set, forgot which brand. I'll look over the weekend. I'm local as well

Sounds good! Let me know if you find them