Gear change steering mod done

[shane@mbtech]

After bit of faffing with bracket i got my gearchange mod complete tonight:thumbs:
Those with left arm remaining it will be an easy job, as you can mount your switch in the plastic housing, but as the m track button circuitary was behing the right hand side, i had to create a switch mount, as shown in pics below.

All that is required is a little time patience, a few tools,
A pushbutton, push to make momentary switch
A suitable bracket.

I will see you at Oulton on 1st August, show you how a real one arm bandit drives:thumbs:

[shane@mbtech]

[glendog74]

Quality work and nice write-up :thumbs:

[csl_mba]

That my friend is awesome :thumbs::thumbs:

Although it does give you an unfair advantage at Oulton Park :whistle:

[Mark CSL]

Thats a great write up Lawsy keep up the good work :thumbs:

[Bealo]

Well done mate, you made that look easy, enjoy your trackday :thumbs:

[TANKSLAPPER]

I've done mine now

I put a push button on top of the steering wheel which does my up change. The right hand paddle is still usable to change up a gear

It works really well should of done it years ago.



Thanks lawsy,

[shane@mbtech]

I've done mine now

I put a push button on top of the steering wheel which does my up change. The right hand paddle is still usable to change up a gear

It works really well should of done it years ago.



Thanks lawsy,

#

I wish the m track button was not on the right hand side, then i could have done this.:banghead:
After driving it i may do away with the m track circuitary and mount a switch the same as yours.
I will either drive full traction on or off.
It will look neater like yours.

Have you flocked your wheel? looks good:thumbs:

[Thorney]

Well done guys, both look like quality bits of work. We're just about to finish our version for the race csl as we've upgraded to a sparco smaller removeable wheel so have a whole new paddle arrangement.