Originally posted by DuncanR
View Post
Announcement
Collapse
No announcement yet.
Brake fluid
Collapse
X
-
Stella... invented for Lager louts who havent got the bollox to give the missus a smack when they are sober !!!! :hahaha:Originally posted by _Nathan_ View Post:gayfight:
Not that anyone should be doing that anyway, they are to be loved and cherished, and adored ... and shagged silly now and again !!
Leave a comment:
-
I guess its the old story, just 1 or 2 refiners making the fluid, and a plethora of people getting the same fluids packaged in their own bottles !!:banghead:..... bit like Lager really ... real men drink Ale !!:thumbs:Originally posted by _Nathan_ View PostI got mine from lidl
Leave a comment:
-
That is what I use, cheap and it works just fine, no boiling of fluid ever.
Leave a comment:
-
-
at the end of the day AP specifically say DONT USE Silicone based fluids.
IF BMW say dont use anything but Castrol Edge in the engines i listen, so im sticking to non silicone based fluids as well in my AP callipers :blalalala:
Leave a comment:
-
Originally posted by The Gorilla View PostHi,
I expect if you did a Brake test between Std CSL Brakes
and a 355mm BBK Kit then then the stopping distance
between the two would be very similar.
If you then continually repeated the Brake test, over a
period the BBK would still repeat its stopping distances
more or less, whereas the Std Brakes would start to fade somewhat.
Meaning if you are a 'Light' user of the Brakes, which
usually equates to a fast driver then for light Track use,
good Pads, S/S Hoses and some ATF Blue will be
fine.
If on the other hand you ride the Brakes hard, then the
Std Brakes, even with upgrades will be showing signs
of fade in two or three laps of any Track with spirited driving.
On the question of Brake Fluid, for Track Days, ATE Blue
is as good as it gets for the money.
Reason being, that if you require the extra 60 + degrees
dry and 100 odd + degrees in the wet that
Castrol SRF offers, then there is either something wrong
with your Brakes or your Driving.
Regards,
The Gorilla.
:thumbs: i agree
Leave a comment:
-
Think I'll probably go the ap600/660 type stuff. Although more expensive £10 or £20 more is insignificant in terms of expense of trackdays or even to get fluid change.
Further to the SRF debate. Castrol's own info spec sheet states unequivocally on page two:
Compatibility: Castrol SRF is compatible with seal rubber and
metal materials used in brake systems using conventional
polyglycol brake fluids.
If seals were to go because of SRF and something bad happened, would they be in trouble legally even if the Queen had sent me a memo?
Leave a comment:
-
Originally posted by _Nathan_ View PostShimmey - SRF is DOT 4 not DOT 5, whilst it is based on a silicone ester it isn't in the class of DOT5 classified silicone fluids which is what I believe that note to refer to and indeed, it can be mixed with 5.1 fluid with no issues. No idea on issues with calliper seals though, I've used it on several cars in the past, one of which was running APs all round and no issues on that front.
I am of the school of thought that a decent fluid changed regularly is better than the ultimate fluid left in for 18 months so use the AP PFR660 DOT 4 stuff or similar.
:thumbs:
tbh i hardly use my brakes so it is all a little irrelevant to me! :whistle:
Leave a comment:

Leave a comment: