roll cage, questions

[Kislik]

thinking to remove rear seat, change front for recaros (just to have a chance to have 5 point harness as stock have no holes) and install 4 or 5 point harness. Is there a cage which i can mount and dismount without any big changes? I mean If i ever want to make the car 100% back stock to have that chance...

i mean not full cage, just back

thank you

[_Nathan_]

Wiechers-Sport do one that is specifically designed to avoid the CSL Carbon panels in the rear.

[flow_csl]

I have the Wiechers one .

You always have to drill holes in the car to mount the cage .

[DuncanR]

I have the Wiechers one .

You always have to drill holes in the car to mount the cage .

+ 1 for Weichers mine is a 6 point bolt in cage, so I have front section as well .... makes you go a bit faster !! . www.wiechers-sport.de/
posted a couple pics showing harness and seat runners for Recaros...cos im like that ! :smokin:

[uncle benz]

I've got the Safety Devices full cage, and I fitted the rear only SD cage to Titans car. The rear cage would be reasonably easy to reverse, and all holes would cover up as long as you don't cut your rear carpet about to fit it back in nicely.

[karbonkid]

Installing a rear cage alone obviously requires either welding or bolting.
Both being fairly permanent until either the welded option is cut & ground off or bolted option unbolted & plugged up. Bolting I recommend drilling a minimum of 3 holes/ bolts per 2x floor legs and Weicher I believe supply a 2mm plate when bolting but would prefer a 3mm-6mm plate to be used. Carpet would need to be cut for 2x legs on rear cage only or obviously removed. Alternatively if/ when reverting back to standard buy a new one.