Announcement

Collapse
No announcement yet.

Brakes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • david
    replied
    AP all around with option 378 x 36mm front rotors

    Just by AP brake kit M3 E92 and that fit with just a small mod on the braker caliper the M3 E46 spindle and hub... I run theses since last year.

    Leave a comment:


  • The Gorilla
    replied
    Hi,

    MattCSLnut- I belive the mounting
    centres are different, and the
    disc offset.

    The 840 Ci calipers with the E46 M3
    Discs work well, for a road car upgrade
    and some Track Day use.

    AlexK- on your weight comparission
    what are you factoring in for the
    Disc belles and belle mounting nuts and bolts ?

    AP Web site weight is for disc only.

    Regards,

    The Gorilla.

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by The Gorilla View Post
    Hi,

    Another route you can go on the CSL
    is to use a set of the Brembo Calipers
    of the BMW 840 Ci
    .

    It means going down to the M3 324 x 28
    front discs, but they stop a near on 2 ton
    8 series very well.

    These will bolt straight on with no need
    for Caliper Brackets etc, you just have
    to remove the CSL caliper adapter.

    Few E46 M3 owners run these.

    Regards,

    The Gorilla.
    Hi Gorila

    Before I decided to go with the Porsche BREMBO 4 pot callipers over my OEM CSL discs, I though about the 840 Ci BREMBOs you mention above but thought they were a bit small
    and the pad contact patch wasn't that much bigger then the standard CSL pads. Can these be bolted straight on at the rear over the OEM CSL discs as well ?

    Leave a comment:


  • The Gorilla
    replied
    Hi,

    Alexk-

    I do not think you will find that the
    AP Discs at 48 vane 354 x 32mm
    are lighter than the std CSL
    Discs at 345 x 28mm.

    I run the '24' vane 354 x 28 on my
    E30 M3 as they are are nearly 1kg
    lighter each than the 354 x 28 '48' vane.

    Its not just diameter but the number and
    thickness of the cooling vanes that can
    make a big difference to disc weight.

    Another route you can go on the CSL
    is to use a set of the Brembo Calipers
    of the BMW 840 Ci.

    It means going down to the M3 324 x 28
    front discs, but they stop a near on 2 ton
    8 series very well.

    These will bolt straight on with no need
    for Caliper Brackets etc, you just have
    to remove the CSL caliper adapter.

    Few E46 M3 owners run these.

    Much, much better than the std
    CSL Brakes, even though your
    running a smaller disc, and even
    more weight saving AlexK !!!! [Lol]

    S/H set is usually about 2-300 pounds,
    or you can still purchase them new from
    the Dealer from around 900 inc VAT.

    Mkoop- if they are two part caliper, not mono
    block, then have a spacer made
    to bolt between the 2 halves in
    hard alloy or Ti.

    Regards,

    The Gorilla.

    Leave a comment:


  • Mark CSL
    replied
    Originally posted by MKoop View Post
    This post has got me thinking. I have a set of Brembo 4 pots seating in the shed gathering dust. They were previously used on my rally car. The discs on the rally car were 26mm. I wonder is there have way of making these calipers work on the 28mm discs?
    Thin Pads :hahaha: or get a spacer made for the caliper :whistle:

    Leave a comment:


  • MKoop
    replied
    This post has got me thinking. I have a set of Brembo 4 pots seating in the shed gathering dust. They were previously used on my rally car. The discs on the rally car were 26mm. I wonder is there have way of making these calipers work on the 28mm discs?

    Leave a comment:


  • alexk
    replied
    Originally posted by The Gorilla View Post
    By retaining the 28mm std discs rather than
    after market you would also have less
    unsprung weight on the front, which helps.
    That's not necessarily true.
    The AP front discs are similar weight, if not lighter than the CSL discs.
    Also, the AP calipers are much lighter than the stock CSL ones.

    A list I am compiling

    http://clubcsl.com/index.php?option=...d=10&Itemid=11

    Leave a comment:


  • Mark CSL
    replied
    380 x 32 like these big bad boys
    Attached Files

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by AlexGTT View Post
    Your showing an uncommonly unhealthy interest Matt.:whistle:
    Not interested at all :smt009 just a little surprised to see you knowing so much about Shimm's BIG :gayfight: trains :hahaha:

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by The Gorilla View Post
    Hi,

    If I was doing this to a road car that
    see's some Track work, I would stick
    with the std CSL Discs
    and find some
    6 pot Alloy calipers that have piston sizes
    similar to the AP 6 pot.

    Then fit uprated flex brake lines to front
    and rear,with the ATE super blue fluid, and
    the RS 29 front pads, which many hear
    swear by.

    The std Discs are 28mm thick, most
    after market are 32 -35mm, so
    with some research on the calipers you
    would have a very good set up, that could
    be all done for around 1k if your std CSL
    discs are good.

    By retaining the 28mm std discs rather than
    after market you would also have less
    unsprung weight on the front, which helps.

    Regards,

    The Gorilla.
    Standard CSL discs are very good :thumbs: but why bother searching in vain for 6 Pot callipers to fit over the OEM CSL discs when BREMBO make perfectly usable 4 pot callipers off Boxter S / Cayman S that are readily available and with a little imagination :whistle: fit snugly over CSL OEM discs :smokin:
    BTW, you just knew that pic was coming :hahaha:
    Attached Files

    Leave a comment:


  • Bounce
    replied
    Originally posted by mattCSLnut View Post
    Don't you get all technical with your advice :whistle: :hahaha:
    :hahaha::hahaha:

    Leave a comment:


  • AlexGTT
    replied
    Originally posted by mattCSLnut View Post
    D'oh :bigcry: ... apparently ? :gayfight: Go on, spill the beans :hahaha:
    Your showing an uncommonly unhealthy interest Matt.:whistle:

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by AlexGTT View Post
    It's how Shimmy likes everything, including his trains apparently.:whistle:
    D'oh :bigcry: ... apparently ? :gayfight: Go on, spill the beans :hahaha:

    Leave a comment:


  • AlexGTT
    replied
    Originally posted by shimmy View Post
    Big ones.

    Reall big ones. :smokin:
    It's how Shimmy likes everything, including his trains apparently.:whistle:

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by shimmy View Post
    Big ones.

    Reall big ones. :smokin:
    Don't you get all technical with your advice :whistle: :hahaha:

    Leave a comment:

Working...
X