I'd only add to that by saying if your less inclined to get your hands dirty yourself, the front AP kit is a great off the shelf solution. Tryed and tested.
If I was doing this to a road car that
see's some Track work, I would stick
with the std CSL Discs and find some
6 pot Alloy calipers that have piston sizes
similar to the AP 6 pot.
Then fit uprated flex brake lines to front
and rear,with the ATE super blue fluid, and
the RS 29 front pads, which many hear
swear by.
If you want to you could also fit a brake
bias valve in on the rear lines just of
the ABS under the bonnet or in car.
The std Discs are 28mm thick, most
after market are 32 -35mm, so
with some research on the calipers you
would have a very good set up, that could
be all done for around 1k if your std CSL
discs are good.
By retaining the 28mm std discs rather than
after market you would also have less
unsprung weight on the front, which helps.
Leave a comment: