Front splitters paint..

[billyboysm3]

No idea what they're worth second hand, so I fired them on eBay for now.

If anyone wants them, send me a PM.

Whats the link?

[Wallachie]

Whats the link?

Sorry they've now been sold to a fellow CSL Register member. :beer:

[steveH]

Im joking. But has anyone had success in the refurb of them?

Sytner (Sheffield) bodyshop did mine and although not damaged only stone chipped lacquer I gave them the instructions from link on here and they did a super job. Chartwells Derby are capable too as they have top carbon guy who rebuilds damaged front ends of Fezzas etc.. So it is possible.

[shimmy]

I spoke to Simpsons today about this and as they now have a paint shop and spray booth plus a specialist painter who knows Carbon Fibre they say the can do these easy peasey and have done a few alread with no issues.:thumbs:

[need4speed]

I spoke to Simpsons today about this and as they now have a paint shop and spray booth plus a specialist painter who knows Carbon Fibre they say the can do these easy peasey and have done a few alread with no issues.:thumbs:

Good to know! :supz:

[shane@mbtech]

To be fair, its only wetsanding then lacquer. Any bodyshop should be able to accomodate.

Its not voodoo magic.

[shimmy]

To be fair, its only wetsanding then lacquer. Any bodyshop should be able to accomodate.

Its not voodoo magic.

However, not over sanding is a skill (machine sanding can go straight thru the CF) and also applying the right lacquer isn't always done.


I should know!:whistle:

[shane@mbtech]

However, not over sanding is a skill (machine sanding can go straight thru the CF) and also applying the right lacquer isn't always done.


I should know!:whistle:

Yeh, buts you be an amatuer. :hahaha::hahaha:

Sticky Mickey the ducati race carbon King did mine.

Who in their right mind, would machine sand a small trim like that:whistle:

Will had a mate of ours do his full ralliart carbon front splitter on his Evo, it looked better than it was when new:thumbs:

[shimmy]

Who in their right mind, would machine sand a small trim like that:whistle:
:

Not me!:smokin:

[glendog74]

I spoke to Simpsons today about this and as they now have a paint shop and spray booth plus a specialist painter who knows Carbon Fibre they say the can do these easy peasey and have done a few alread with no issues.:thumbs:

I can confirm they do a great job too. They repaired a couple of stone chips on my roof as well as making a set of splitters look like new again whilst repairing a completely fooked set to be a spare track day set.

Highly recommended :thumbs:

[billyboysm3]

I can confirm they do a great job too. They repaired a couple of stone chips on my roof as well as making a set of splitters look like new again whilst repairing a completely fooked set to be a spare track day set.

Highly recommended :thumbs:

What price did you pay?

[shimmy]

What price did you pay?

i was gonna arrange a mass make good or splitters price :thumbs: