Announcement

Collapse
No announcement yet.

CSL smarten up plans

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    CSL smarten up plans

    Had our spraybooth in for a year now and running just how we want so time to get the CSL refreshed for next year with the following:

    Front end respray to bonnet, bumper, front wings.
    Lower side panel respray to rear of front wings, sills and in front of rear wheels. Also annoying drivers door scratch.
    Carbon diffuser and front flipper refinish.
    Spare wheels refurbed to something lighter than black. Not sure yet.
    AP's refurbed.
    Intrax refurbed.
    Film protect front and lower sides.

    Anyone else have similar plans over Winter?

    #2
    Front resray and AP refurb on my list.

    Front end isn't too bad as it's been filmed from new. However it's the film that's starting to look a bit tatty.

    Comment


      #3
      Originally posted by AlexGTT
      Had our spraybooth in for a year now and running just how we want so time to get the CSL refreshed for next year with the following:

      Front end respray to bonnet, bumper, front wings.
      Lower side panel respray to rear of front wings, sills and in front of rear wheels. Also annoying drivers door scratch.
      Carbon diffuser and front flipper refinish.
      Spare wheels refurbed to something lighter than black. Not sure yet.
      AP's refurbed.
      Intrax refurbed.
      Film protect front and lower sides.

      Anyone else have similar plans over Winter?


      I'm gonna wash mine before March, almost definitely.:smokin:

      Comment


        #4
        I would like to refresh mine but in reality the only three things I might do are;


        1. AP refurb all round and definitely replacing the anti-rattle clips and tubes which look very rusty

        2. Refurb of my OEM CSL rims from dark grey to Silver OeM with my new tyres due soon.

        3. Rear Intrax refurb

        Comment


          #5
          Yeah, few plans...
          Attached Files

          Comment


            #6
            Mine is getting a full front end spray .
            Remove all dents (alot)
            A good clean :thumbs:

            Comment


              #7
              Done a few bits since purchase

              so far I've change the front lens, had the steering wheel re-trimmed and bought new trim pieces. Had the car aligned properly(felt like a different car after that). Replaced front spliters with older style(better fit), painted rear centre console due to marks and scuffs.(looks like new)
              Still to do and recently added to the list ,refub wheels, front end/rear bumper respray and new CSL door trim sills.

              Then I'll be happy

              Comment


                #8
                Originally posted by toplad View Post
                Done a few bits since purchase

                so far I've change the front lens, had the steering wheel re-trimmed and bought new trim pieces. Had the car aligned properly(felt like a different car after that). Replaced front spliters with older style(better fit), painted rear centre console due to marks and scuffs.(likes like new)
                Still to do and recently added to the list ,refub wheels, front end/rear bumper respray and new CSL door trim sills.

                Then I'll be happy
                i need to do rear centre seat black, how did you do it?

                Comment


                  #9
                  Originally posted by shimmy View Post
                  I'm gonna wash mine before March, almost definitely.:smokin:
                  :hahaha::hahaha:

                  Comment


                    #10
                    Just picked mine up from BMW this week had the interior sorted out after the little off at Spa. New wheel centres too as the old ones were knackered and new sill trims.

                    Asked for the old ones back. They got binned. :banghead:

                    Next will be off to sort the couple of dents and scratches out and sort the front bumper where it got reversed into.

                    Jesus, it sounds like a shed!

                    Comment


                      #11
                      yep, mine will be defo be getting freshened up

                      Interested in how you did the seats Adam? I know a shit hot painter if you need one for the bumper.

                      I found out my local dealer fooked a nipple on my APs when changing the fluid so I will need to sort that out. Ordered a new set of AST rear springs so they will be going on at some point.

                      Shimmy, wire wool and a wire brush will sort the tubes and rattle clips, put a bit of hammerite on the clips, the tubes are alloy and clean up nicely.

                      Comment


                        #12
                        I think God speed re furb APs now (inc painting), not sure how much £££

                        Comment


                          #13
                          I've got a better idea, let's all take them round Alex's for the winter

                          Comment


                            #14
                            Originally posted by shimmy View Post
                            I've got a better idea, let's all take them round Alex's for the winter
                            I could have predicted that.:hahaha:

                            Get your grity sponge and jet wash out then. Detailing, Shimmy style.:thumbs:

                            Comment


                              #15
                              Well i'm going for complete front end respray from windscreen forward, lower 1/2 on both sides to fix the shot blast look & rear bumper.
                              Also have a dog inflicted dent to get taken out of the drivers door.

                              Air box has a snapped screw which i need to extract and I also have the rear seat issues.

                              Reading that back it seems i have trashed the car this year :bigcry: :bigcry: :bigcry: :hahaha:

                              Comment

                              Working...
                              X