Announcement

Collapse
No announcement yet.

BMW Performance Brakesystem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • shimmy
    replied
    Originally posted by mattCSLnut View Post
    Sure, the single piston callipers are an utter embarrassment :clown: on our cars but the weakest point IMHO are the crap OEM pads :banghead: and as Shimmy mentioned brake cooling issues, that further enhance the crapness of it all.
    I had mine without APs for about 3 months so mostly forgotten but I think that with good fluid and decent pads it would be very hard to cook the brakes on the road.

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by Levente View Post
    not only the pads, but only one piston brakes? what were they thinking? im suprised about the brakedistance from 100 km/h is 33meter. Well they say that
    Sure, the single piston callipers are an utter embarrassment :clown: on our cars but the weakest point IMHO are the crap OEM pads :banghead: and as Shimmy mentioned brake cooling issues, that further enhance the crapness of it all.

    Leave a comment:


  • Levente
    replied
    I dont want to go to the Ring often, so mainly i want to use the car for open road and perhaps mountain roads. BMW Performance brakes are good then for this? Anyone know the price for fat new performance brakesystem?

    Leave a comment:


  • shimmy
    replied
    Originally posted by mattCSLnut View Post
    And I agree additional cooling (mainly @ the front) would be a welcomed addition on the M3/CSL but as we all know the OEM pads shit themselves even on a public road after repeated use.
    By upgrading to AP Racing, BREMBO, etc we are still left with cooling issues, are we not ?
    No, my APs have never had any cooling problems, by that I mean the discs and callioers do not get so hot that when driving the retained heat boils the fluid or melts the pads. With the best fluid in standard brakes, you can still cook it quite easy.

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by shimmy View Post
    I disagree a little Matt, it's the cooling of the whole system that's not up to much. Stopping power is ok, but heat just ruins them on track.
    And I agree additional cooling (mainly @ the front) would be a welcomed addition on the M3/CSL but as we all know the OEM pads shit themselves even on a public road after repeated use.
    By upgrading to AP Racing, BREMBO, etc we are still left with cooling issues, are we not ?

    Leave a comment:


  • Levente
    replied
    Originally posted by mattCSLnut View Post
    It's mainly the CSL OEM pads that are so crap. Put some decent after market pads like PAGID or Performance Friction then change your OEM rubber brake lines to Goodridge stainless steel lines and maybe upgrade your brake fluid to ATS Super Blue Racing or MOTUL RBF 660.
    Any of these three simple mods or the combination of all three will vastly improve the OEM crapness :clown: and will be perfect for every day/fast road use as well as occasional Track Day :smokin:
    not only the pads, but only one piston brakes? what were they thinking? im suprised about the brakedistance from 100 km/h is 33meter. Well they say that

    Leave a comment:


  • shimmy
    replied
    Originally posted by mattCSLnut View Post
    It's mainly the CSL OEM pads that are so crap. Put some decent after market pads like PAGID or Performance Friction then change your OEM rubber brake lines to Goodridge stainless steel lines and maybe upgrade your brake fluid to ATS Super Blue Racing or MOTUL RBF 660.
    Any of these three simple mods or the combination of all three will vastly improve the OEM crapness :clown: and will be perfect for every day/fast road use as well as occasional Track Day :smokin:

    I disagree a little Matt, it's the cooling of the whole system that's not up to much. Stopping power is ok, but heat just ruins them on track.

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by Levente View Post
    thanks for the info... I cant belive the stock csl brakes are so crap
    It's mainly the CSL OEM pads that are so crap. Put some decent after market pads like PAGID or Performance Friction then change your OEM rubber brake lines to Goodridge stainless steel lines and maybe upgrade your brake fluid to ATS Super Blue Racing or MOTUL RBF 660.
    Any of these three simple mods or the combination of all three will vastly improve the OEM crapness :clown: and will be perfect for every day/fast road use as well as occasional Track Day :smokin:

    Leave a comment:


  • Levente
    replied
    thanks for the info, i want to buy it in one of the BMW service in München, hopefully it doesnt cost as much as the Brembo Gran Turismo brakes. Is it possible to buy it seperate , i mean buy Replace only the front brakes, and replace the back ones later? I cant belive the stock csl brakes are so crap

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by Bounce View Post
    Thought so,as i looked into getting them:banghead: did you need extra brackets with yours Matt.
    Yep :smokin:

    Leave a comment:


  • Bounce
    replied
    Price includes CSL discs http://www.bmminiparts.com/PartDetai...3-415E3EAC67D1

    Leave a comment:


  • Bounce
    replied
    Originally posted by mattCSLnut View Post
    IIRC extra bracket solutions are required :banghead:
    Thought so,as i looked into getting them:banghead: did you need extra brackets with yours Matt.

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by Bounce View Post
    Dont think they fit straight onto a CSL.
    IIRC extra bracket solutions are required :banghead:

    Leave a comment:


  • Bounce
    replied
    Dont think they fit straight onto a CSL.

    Leave a comment:


  • Martin_BG
    replied
    Levente you may wanna contact this guy http://www.m3forum.net/m3forum/showthread.php?t=393210 for some more info :beer:
    Wonder, why will he take them off....:whistle:

    Leave a comment:

Working...
X