Announcement

Collapse
No announcement yet.

Overheating on track only

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ando
    replied
    Originally posted by shimmy View Post
    Ando

    what does your last sentence mean?
    Headgasket went last year, Mr Vanos did it, told me he's done loads of m3 and csl's, as they are lean at the top end of the rev range. so have had it re mapped, it was lean according to the guy that mapped it a local garage done it on a rolling road, took the limiter off to. I had it on track this year got a miss fire and Mr Vanos check it over as I thought ot could be headgasket again, it was coil packs. he asked if I'd had it mapped yet I said 'No' as the car has gone out to the ring this year I thought I'd have it done before it went. Was down on power and torque, feels nice now.

    Hopefully will feel even better this weekend when I go out and the Shrick Cams and another remap have been done.

    Cheers

    Ando

    Leave a comment:


  • shimmy
    replied
    Originally posted by alexk View Post
    lawsy you keep insisting the viscous fan is not a problem, but correct me here.
    Do you have experience in countries with very high temperatures (i.e. Greece with 45+) ?
    As I said in the other thread, the viscous fan is a problem in BMWs when the weathers is very hot and speed less than 60km/h (i.e. going uphill with second gear).
    That's coming from 30+ years of experience in a country with very hot weather.

    either way its got feck all to do with my question! (as its nothing to do with overheating on track at 100% throttle) :banghead:

    Leave a comment:


  • alexk
    replied
    Originally posted by lawsy View Post
    The viscous fan shouldn't cool more than the air flowing through the rad.

    But if the viscous is bolloxed it could in theory create drag on the water pump and add to the issue.

    It's worth a pop I suppose.
    lawsy you keep insisting the viscous fan is not a problem, but correct me here.
    Do you have experience in countries with very high temperatures (i.e. Greece with 45+) ?
    As I said in the other thread, the viscous fan is a problem in BMWs when the weathers is very hot and speed less than 60km/h (i.e. going uphill with second gear).
    That's coming from 30+ years of experience in a country with very hot weather.

    Leave a comment:


  • shane@mbtech
    replied
    Originally posted by ando View Post
    Hey Up,

    I have only had the oil go to 120 and the water slightly above half way at the Ring, only time it went higher was following a mate in his focus RS videoing him and I think he was punching a massive hole in the atmosphere and I couldn't get any cooling cuz of the barn in front of me! lol but as soon as we finished the lap and I pulled out in to the air flow the temp dropped to normal. I have oem headers, miltek 100 cells cats and oem back box. It has had a remap after running lean, as I believe they all do on standard maps, but that was only done this year.

    Ando.
    Who mapped it?
    Who told you they run lean standard?

    Leave a comment:


  • shimmy
    replied
    Originally posted by ando View Post
    Hey Up,

    I have only had the oil go to 120 and the water slightly above half way at the Ring, only time it went higher was following a mate in his focus RS videoing him and I think he was punching a massive hole in the atmosphere and I couldn't get any cooling cuz of the barn in front of me! lol but as soon as we finished the lap and I pulled out in to the air flow the temp dropped to normal. I have oem headers, miltek 100 cells cats and oem back box. It has had a remap after running lean, as I believe they all do on standard maps, but that was only done this year.

    Ando.

    Ando

    what does your last sentence mean?

    Leave a comment:


  • ando
    replied
    Hey Up,

    I have only had the oil go to 120 and the water slightly above half way at the Ring, only time it went higher was following a mate in his focus RS videoing him and I think he was punching a massive hole in the atmosphere and I couldn't get any cooling cuz of the barn in front of me! lol but as soon as we finished the lap and I pulled out in to the air flow the temp dropped to normal. I have oem headers, miltek 100 cells cats and oem back box. It has had a remap after running lean, as I believe they all do on standard maps, but that was only done this year.

    Ando.

    Leave a comment:


  • shane@mbtech
    replied
    The viscous fan shouldn't cool more than the air flowing through the rad.

    But if the viscous is bolloxed it could in theory create drag on the water pump and add to the issue.

    It's worth a pop I suppose.

    Leave a comment:


  • manos///3
    replied
    When the air temperature was vey high on track, the engine water temp was climbing to 3/4 , close to red.
    Then I changed fan coupling on the main fan and motorsport thermostat and disabled this problem.

    My cats are 200 cell SS (cod 787502)

    Leave a comment:


  • CraigMillwardCroft
    replied
    Originally posted by northernjim View Post
    :whistle: :bigcry: it's the only reason I've gone rwd now...
    Was that due to also drive shafts breaking on circuits

    Leave a comment:


  • northernjim
    replied
    Originally posted by CraigMillwardCroft View Post
    Just lag out of the corners :whistle:
    :whistle: :bigcry: it's the only reason I've gone rwd now...

    Leave a comment:


  • CraigMillwardCroft
    replied
    Originally posted by northernjim View Post
    Let's face it.... These csl's are just am expensive pike of junk really


    Never had these problems with my blue oval running oodles of boost! :hahaha::hahaha:
    Just lag out of the corners :whistle:

    Leave a comment:


  • shimmy
    replied
    Originally posted by Mark CSL View Post
    They dont run long enough to have overheating problems :whistle:
    And 100% throttle is about 35bhp :thumbs:

    Leave a comment:


  • alexk
    replied
    Originally posted by shimmy View Post
    i have whatever bmw put in with. new engine, not sure what
    The bottle says to mix it 1:1 with water.
    It is better to have plain fluid though.

    Leave a comment:


  • Mark CSL
    replied
    Originally posted by northernjim View Post
    Let's face it.... These csl's are just am expensive pike of junk really


    Never had these problems with my blue oval running oodles of boost! :hahaha::hahaha:

    They dont run long enough to have overheating problems :whistle:

    Leave a comment:


  • northernjim
    replied
    Let's face it.... These csl's are just am expensive pike of junk really


    Never had these problems with my blue oval running oodles of boost! :hahaha::hahaha:

    Leave a comment:

Working...
X