CSl Spring refresh

[shimmy]

So I'm a bit late with the winter makeover so I'm doing it in the spring!

Plans are as follows:

1. New front prop coupling (old one worn out)
2. New AC condenser (see if this helps cooling)
3. Gearbox fluid change/Diff fluid change
4. Power steering fluid change
5. AP brake strip, seals, nipples and paint an refit
6. New good ridge brake lines
7. Front brake stone guards
8. Front and rear wheel bearings
9. Intrax refurb to black Titan
10. New Geo

Need to get going!

[Trawler]

So I'm a bit late with the winter makeover so I'm doing it in the spring!

Plans are as follows:

1. New front prop coupling (old one worn out)
2. New AC condenser (see if this helps cooling)
3. Gearbox fluid change/Diff fluid change
4. Power steering fluid change
5. AP brake strip, seals, nipples and paint an refit
6. New good ridge brake lines
7. Front brake stone guards
8. Front and rear wheel bearings
9. Intrax refurb to black Titan
10. New Geo

Need to get going!

Didn't know you are into DIY keep this up & you will be giving Gareth a run for his money.

[shimmy]

Didn't know you are into DIY keep this up & you will be giving Gareth a run for his money.

Didn't say I'd be doing it

[s.mac]

What are you doing with your nipples Shimmy ?

[shimmy]

What are you doing with your nipples Shimmy ?

Do you want them GayColin?

[s.mac]

Are they still as pert as your holiday pic ?

[shimmy]

Are they still as pert as your holiday pic ?

I HAVE NEVER LOOKED THAT CLOSELY :smokin::gayfight:

[s.mac]

GayColin always notices :smt055

[DazBlackCSL]

:hahaha:

[shimmy]

So I'm a bit late with the winter makeover so I'm doing it in the spring!

Plans are as follows:

1. New front prop coupling (old one worn out)
2. New AC condenser (see if this helps cooling)
3. Gearbox fluid change/Diff fluid change
4. Power steering fluid change
5. AP brake strip, seals, nipples and paint an refit
6. New good ridge brake lines
7. Front brake stone guards
8. Front and rear wheel bearings
9. Intrax refurb to black Titan
10. New Geo

Need to get going!

Eurocarparts have sale on so thought about buying the bits now.....but not sure on quality

[mattCSLnut]

Eurocarparts have sale on so thought about buying the bits now.....but not sure on quality

Stick to "Lemforder" , "Valeo", etc parts as they are (more often than not) one of the BMW OEM parts makers :smt023

[Graham]

Lemforder is OEM quality. Used a few bits on mine, tie rod ends, track rod ends etc. Know people who've used them for lower arms and they've been fine

[shimmy]

Lemforder is OEM quality. Used a few bits on mine, tie rod ends, track rod ends etc. Know people who've used them for lower arms and they've been fine

FAG are meant t be OEM as well, or is that just in uS

[Bounce]

FAG are meant t be OEM as well, or is that just in uS

:hahaha::hahaha: there are a few Fags on here :gayfight:.You are right though FAG make OE wheel bearing kits for BMW.

[Bounce]

And Valeo are the OE suppliers of the Alternators,not that is anything to be proud of:-D