Announcement

Collapse
No announcement yet.

Exciting carbon news!

Collapse
X
Collapse
 
  • Page of 9
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 5 9 template Next
    #61
    Originally posted by Mike R View Post
    Next will be the strut brace and full width splitter .
    i want full width splitter. please count me in

    Comment

      #62
      Hi Mike,

      I need the front carbon for the front bumper on my one please?

      Are you making these yet?

      Thanks

      Comment

        #63
        Originally posted by Smoftah View Post
        Hi Mike,

        I need the front carbon for the front bumper on my one please?

        Are you making these yet?

        Thanks
        I don't know what you mean? Are you referring to the OEM splitters or the full width item?

        Comment

          #64
          Oem ones please.

          Comment

            #65
            Originally posted by Smoftah View Post
            Oem ones please.
            The OEM ones are available on a 5-7 working day lead time .

            See thread here:
            CSL flippers - originals -v- current ones - NA M3 Forums
            https://nam3forum.com/forums/forum/csl-register/csl-register-main-discussion-centre/449430-csl-flippers-originals-v-current-ones
            EDITED TO CLARIFY, THE ONES IN THE FORE-GROUND ARE THE ORIGINALS AND THE ONES IN THE BACK-GROUND ARE THE NEW ONES (the creamy coloured stuff on the OE ones is where they have had the mold taken from them). Not sure where to put this, so thought I would start here and then if Mark feels it belongs in the for sale section, it

            Comment

              #66
              Mike

              Can your man replicate the plastic trim piece that goes on the side the front seats (the "L" shaped piece, plus the little plastic bit that bolts to the seat sliders (part no.3 seen in photo below)



              If so and well priced I'd be interested in a pair. The stock OEM pricing for these plastic bits are just a bit over the top.

              Comment

                #67
                Do you mean in carbon fibre?

                Comment

                  #68
                  Mike are you able to make the surround around the smg gear knob

                  Comment

                    #69
                    Originally posted by NZ_M3 View Post
                    Mike

                    Can your man replicate the plastic trim piece that goes on the side the front seats (the "L" shaped piece, plus the little plastic bit that bolts to the seat sliders (part no.3 seen in photo below)



                    If so and well priced I'd be interested in a pair. The stock OEM pricing for these plastic bits are just a bit over the top.
                    I would be interested in a set of these also if they can be copied in CF.

                    Comment

                      #70
                      Originally posted by Mike R View Post
                      Do you mean in carbon fibre?
                      Correct! Ask your parts department how much those are to buy and you'd think it's made of Gold!!!

                      Comment

                        #71
                        Okay, my car is finally coming back soon (got an email yesterday to say cams are on their way :supz: ), so will take a set off and send them to be molded. Can you confirm that they are identical for each seat (as in passenger and driver's set are identical)?

                        Comment

                          #72
                          Originally posted by NZ_M3 View Post
                          Correct! Ask your parts department how much those are to buy and you'd think it's made of Gold!!!
                          It's the same for the rear seat centre console - it's over a grand (GBP) for that bit of plastic from BMW :hahaha:. Makes the carbon one at half the price seem a veritable bargain :thumbs:.

                          Comment

                            #73
                            Originally posted by Paulgreatheadcsl View Post
                            Mike are you able to make the surround around the smg gear knob
                            Hi Paul,
                            Anything can be done, but at the moment, I want to concentrate on the things unique to the CSL .

                            Comment

                              #74
                              Originally posted by Mike R View Post
                              Okay, my car is finally coming back soon (got an email yesterday to say cams are on their way :supz: ), so will take a set off and send them to be molded. Can you confirm that they are identical for each seat (as in passenger and driver's set are identical)?
                              No they are sided unfortunately! There's two pieces to each seat, the L shaped piece held in by three hex bolts and another rail trim piece that sits just under it held in by two hex bolts.

                              Comment

                                #75
                                I noticed the plastic around the bolt holes, on the side trim for the seats which NZ_M3 refers to is rather fragile too!

                                Some CF versions of these would look superb and resolve the fragility issue :thumbs: I'd certainly be interested in buying a couple.

                                Good to hear cams are on the way Mike...hopefully you'll have your car right back in time for some decent weather :-D

                                Comment

                                Previous 1 5 9 template Next
                                Working...
                                X