Square set up

[Yanto_csl]

Where you on track mate ?

[Clubber]

I run 18x9 ET40 Oz Racing Ultraleggera's on 265/35/18 Cup setup with 10mm Front and 20mm Rear Spacers on track. Very happy with them.

[Jon8710]

Cheers
I'm at sentterton Thursday yanto
Im jus worried about the wheel catching the arch
Only one way to find out I suppose

[Chad]

I run 18x9 ET40 Oz Racing Ultraleggera's on 265/35/18 Cup setup with 10mm Front and 20mm Rear Spacers on track. Very happy with them.

Hi all I've not done a track day , does running on these 18' wheels with spacers etc actually improve car ? To me they look like they trying to run with four club feet, any feedback welcome guys .

[Clubber]

Hi all I've not done a track day , does running on these 18' wheels with spacers etc actually improve car ? To me they look like they trying to run with four club feet, any feedback welcome guys .

In my case, i didn't have a choice. KW front springs were touching the tyres so I had to put 10mm spacers front. And the rears ET were too high so I had to put 20mm spacers there. Personally I think it really improves the handling. I always prefer wider touching point of the tyres and 18" s are a must if you are serious about lap times.

[cslsuperfan]

Hi all I've not done a track day , does running on these 18' wheels with spacers etc actually improve car ? To me they look like they trying to run with four club feet, any feedback welcome guys .

Chad

you really are missing out on the csl's magic.

[Chad]

Chad

you really are missing out on the csl's magic.

Your probily right Ben, done 65k street use in mine, but sure it's never bin on its limits, my limit on street use a good few times, up for that evo triangle if anybody's interested, bikes were more my bag on track but that could change,

[cslsuperfan]

Your probily right Ben, done 65k street use in mine, but sure it's never bin on its limits, my limit on street use a good few times, up for that evo triangle if anybody's interested, bikes were more my bag on track but that could change,

Too many plod on the triangle these days.

[knoxville]

Just fitted the 9j wheels all round and the fronts
Look to be sticking past the arch about an inch
I'm worried about rubbing on track tomorrow.
I'm on standard suspension will this be ok ???

Did they rub? Sticking out far too much IMO. What ET?

[Jon8710]

Hi

they slightly rubbed on full lock on the inner arch lining but not on the arches, they have settled in a little now the suspension has sunk back down but they are still a little proud,

killer on track though !!