Cluch Slip / Slurry on the up changes

[Bounce]

Sorry to sound stupid but I have 2 questions....


Whats slurring (mine had a new clutch 3000 miles ago)

and

When changing gear do you lift off the throttle slightly or just leave the loud pedal alone??


Cheers all
Steve

keep your foot firmly planted and don't start lifting,in my opinion this is what starts clutch slur:wink:

[Steve B]

Cheers for that :beer:

[cantfind1]

I find using too low a dynamic mode creates it as well.....level 4 and above seems to stop it....

[Bounce]

I find using too low a dynamic mode creates it as well.....level 4 and above seems to stop it....

Agree with this,mode 1,2 and 3 change gear to slow

[Mark CSL]

I run setting 3 all the time and setting 6 on track I have had this on all the csl's when i first get them its the clutch cant take up a little wear on the plate so it creates clutch slip if you give the car the beans it takes up the gap but if the clutch slip is there for some time it will burn the clutch and the flywheel and booting the car works but it will come back. :whistle:

Drive it hard and the clutch will be fine :finga:

[Steve B]

Think I better stop using 1 and 2 then lol...