Intrax - serviced

[billyboysm3]

Just got these beauties back from Intrax.

Incase anyone else wants to get theres done:

Contact Erwin:
Erwin van Arkel
[email protected]
Leeuwstraat 68, 5408 PL
Volkel, The Netherlands
T: +31(0)413-272997
F: +31(0)413-273319

https://www.intraxracing.nl

They charge $100 euros per damper

[shimmy]

cool and shiney

did my springs come aswell?

[billyboysm3]

cool and shiney

did my springs come aswell?

Yeah, Ive not opened them and will keep them safe.

[need4speed]

I was at the factory last week (picked the car up from them last Friday), have to say great team of people and a fantastic service.
Front bodies changed from mild steel to Stainless Steel, full overhaul all round and additionally had their new anti-roll system fitted as well. :thumbs:

[83SY]

Shockers look great Bill. Dont go to fast you will get them dirty!

Grant, whats this then bud? - additionally had their new anti-roll system fitted as well??

[need4speed]

Grant, whats this then bud? - additionally had their new anti-roll system fitted as well??

It is just a fancy way of saying additional resevoirs on each of the dampers apparently they assist the individual damper to return (rebound) quicker! Will post some pics up when I get the chance.
Believe it is the first E46 that they have installed it on so I guess I better give them some feedback after the 'Ring trips!

[CraigMillwardCroft]

It is just a fancy way of saying additional resevoirs on each of the dampers apparently they assist the individual damper to return (rebound) quicker! Will post some pics up when I get the chance.
Believe it is the first E46 that they have installed it on so I guess I better give them some feedback after the 'Ring trips!

Can you adjust the camber through the turret hole easily :thumbs:

[Mark CSL]

Will the rear struts not rip the body mounts as the rear is not made to take the strain on that part.

[_Nathan_]

Nah, they are fine, can put the Z3 plates in for strength if you are worried, the floor will rip before the turrets tear :banghead:

[need4speed]

Can you adjust the camber through the turret hole easily :thumbs:

Yep, it is a a bit more accessible than the set up you have. :-D

Will the rear struts not rip the body mounts as the rear is not made to take the strain on that part.

Probably but we will cross the bridge etc... :smt003

[maxmeerkat]

Looks really shiny and bouncy ! Remember getting those changed as well thanks to the crappy salty British grit! However one of my spring perch cracked as well. Must be the exorbitant spring rates I run

[83SY]

It is just a fancy way of saying additional resevoirs on each of the dampers apparently they assist the individual damper to return (rebound) quicker! Will post some pics up when I get the chance.
Believe it is the first E46 that they have installed it on so I guess I better give them some feedback after the 'Ring trips!

Yes mate be good to see what difference it makes.
Have a good time at the ring! :supz:

[northernjim]

It is just a fancy way of saying additional resevoirs on each of the dampers apparently they assist the individual damper to return (rebound) quicker! Will post some pics up when I get the chance.
Believe it is the first E46 that they have installed it on so I guess I better give them some feedback after the 'Ring trips!

I thought that their top of the range kit had external reservoirs already?

Have a good couple of weekends at the ring Grant :thumbs:

[need4speed]

I thought that their top of the range kit had external reservoirs already?

Have a good couple of weekends at the ring Grant :thumbs:

Jim, yes think they do, basically with this set up they put a resevoir on the fronts essentially to locate anti-roll control valve, on the rears they fit the new control valve inside the damper body.




Cheers :smt023

[83SY]

I have just ordered Intrax from Simpson's just waiting to land with them, will they have this new feature?

Went for the stainless & Titan outer bodies :drool: