Thanks for that. Ive got the Castol Edge sport Going Back and getting Castrol Edge. So glad i checked on here as i nearly used that Sport version !! :supz:
Announcement
Collapse
No announcement yet.
Correct Oil
Collapse
X
-
Finally took delivery of my Castrol Edge yesterday. Ive put in 3 litres of it but on the readout it still show 0.1. However when i do the test in the manual where it says hold the sport button down while the engine is idling it shows 1.1 Anyone know why the main readout still shows 0.1? is it broke?
Comment
-
3 litres top-up! Feck me - you may well have overfilled it...
The main reading does take a decent drive to reflect any change - at least 50 miles or so in my experience after my last service. If the initiated test reading says '1.1' then that could confirm overfilling too as that's the max reading it will go to - even if the 'actual' oil level is above that... (which isn't good) :smt012
Comment
-
I'm not sure of the full implications - i'm sure someone on here does though... Obviously with a fair bit more oil in there than the norm, it would mean a bit more resistance on the moving parts as it will be a little swamped so to speak. Other than that i am not totally sure :smt017Originally posted by mattbedford View PostWhat happens if there is too much in now?
If i had a reading of '0.1' i would have put around 750mls in and seen what that did to the reading after a drive, then add a little more as required once the reading stabilised.
Comment
-
While they are at it get them to manually check the oil level. Remind them you want the oil to be just below the max. Every time I have had an oil change this way the read out has always been either 0.7, or 0.8 after a good drive. It also returns back to this figure after a lot of short trips/track work. On my car as far as I am concerned 0.7/0.8 means full.Originally posted by mattbedford View PostTheres a small BMW dealer near me so i will see if they can drain some tomorrow. Thanks for advice guys..
Comment





)
Comment