Announcement

Collapse
No announcement yet.

Brands Hatch Indy lap times!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    Originally posted by Phatgixer View Post
    Was OK

    6th to 2nd. What you can't see in the photo is the Shirmer car in the lead by 2 seconds already!:smokin:

    [youtube]WkFEfEGy3fo[/youtube]

    most likely heloped by the E36 roadblock - or as some call it the Schirmer No 3 car :smokin:


    tbh great start though Agnes

    Comment


      #47
      Originally posted by Phatgixer View Post
      Was OK

      6th to 2nd. What you can't see in the photo is the Shirmer car in the lead by 2 seconds already!:smokin:

      [youtube]WkFEfEGy3fo[/youtube]
      Hell of a start, have you got the extended version of that vid, would love to see it :thumbs:

      Comment


        #48
        Great start Angus.:thumbs::thumbs:

        Comment


          #49
          Originally posted by shimmy View Post
          still plenty warm enough for Cups:thumbs:

          dont worry about times, just bring it home safely titan, we are all holding our breath :whistle:
          heh indeed. Car returned safely home, albeit the brakes are still in the same naff state as they were after snetterton.

          Had a big vbox FAIL - because mine doesn't have a cigarette power lead I borrowed a friends. Spent half an hour tucking it away nicely in the glovebox, upgraded his firmware and did a nice scene for Brands.

          "Sorry, no sucker mounts"

          ah. bugger. So I have some data, just no video.

          First time I've done Brands (well technically the 2nd, but that was like 15 years ago!)

          At lunch I pulled the SD card out and had a quick look, 57s.

          In the afternoon I had some tuition, picking up some racing lines around druids and mclaren, plus more confidence in the car/tyres. Whether that translated to better times or not - who knows. Can't remember whether I put the sd card back in and haven't had a chance to check.

          A number of offs at paddock hill (unsurprisingly!) and one guy had a reasonable roll, naff end to his trackday. Someone might know him, a pair of e36 m3s who were "driving competitively" shall we say. Hence the off no doubt.

          There's another thread on here regarding cup tyres and their wear vs slicks. Well I've done around 60% on a brand new set of cups and I spent a fair amount of the day in other peoples' cars. My judgement is that they are not a hard wearing tyre at all, very similar in wear rate to R888. They also sound terrible once they've picked up rubber and show the signs of track wear. Might be exaggerated at brands due to its size/corners.

          They are also not a tyre for learning RWD control. By the time the rear is letting go you're doing some decent speeds. Ying-Yang Kangalangs for that I think.

          great day, no issues, conversely we got repeatedly black flagged in the MX5 for hanging the tail out

          Comment


            #50
            Originally posted by titan View Post
            They also sound terrible once they've picked up rubber and show the signs of track wear. Might be exaggerated at brands due to its size/corners.
            I agree with this, and Tino (TMAQ) had the same issue when were at Brands (Indy) back in the summer, exiting the last corner onto the pit straight they sounded fooking shot which wasn't nice!

            Comment


              #51
              Once you start managing the pressures and temps better with geo they last longer.

              Regardless of wear they don't go off after 4 laps like R888s do!

              Comment


                #52
                No indeed Nathan, I must add I am on OEM everything barring brakes, and only -1.5 Camber on the front so prob not best for productivity or longevity of Cups at all!

                I did do a good 10-12 hot laps before deciding to come in though so they handled that better than R888's!

                Comment


                  #53
                  Cups can be a bugger in the Autumn as you tend to get the temp up and the rubber gets warm and sticky and it flies off then as soon as you cool down the rubber pick up goes rock hard and it feels like something is badly wrong - did the same at Anglesey last year and very hard to get it off as the track cools

                  Comment


                    #54
                    Originally posted by shimmy View Post
                    Cups can be a bugger in the Autumn as you tend to get the temp up and the rubber gets warm and sticky and it flies off then as soon as you cool down the rubber pick up goes rock hard and it feels like something is badly wron - did the same at Anglesey last year and very have to get it off as the track cools
                    Were you drunk when you typed this? :bigcry:

                    Comment

                    Working...
                    X