spacers needed?

[Barry C]

any pics of how the car looks with them on? :thumbs:

wonder if the standard shocks will foul the wheels too?:whistle:

[conleth m3]

helper spring at top end of shock as in the smaller top pic from intrax, jim.
think it should be ok shimmy without smaller helper or spacer as seems to be plently of clearance from coil/red anodised height adjuster to the tyre wall. will see when i get it re-arranged.

just a shame i cant get it sorted for the weekend as was looking forward to trying it all out

[conleth m3]

any pics of how the car looks with them on? :thumbs:

wonder if the standard shocks will foul the wheels too?:whistle:

only this crappy iphone pic barry, sorry



probably just as well crap pic so you cant see how dirty the fooker is :hahaha:

[conleth m3]

yes just checked with julian here and your black collar is at the wrong end

that will give you a few mm

also prob need smaller helper or small spacer as well

though looking at that photos again shim you could be right, a 3mm spacer might just be best thing. :whistle:

[Barry C]

looks great!

can't wait to get mine on there, should look pretty hardcore with the red AP's behind the wheels:hahaha:

[conleth m3]

yep, with red ap's would look spot on :drool:

[conleth m3]

right, got it sorted today, seems that intrax put a plastic spring mount on the red anodised plaform which sets the ride height of the front shocker. same as you get on the rear shock. from looking at pics of others intrax its not needed, and this was what was fouling the tyres. got it removed today and given me about 5mm more clearance than before. so as lawsy and all said my TD 18" et30 go on the front with no spacers needed :smt026





will get it washed and some photos tomorrow of the wheels on the car. nearly ready for a week of ring and spa aroud easter :thumbs:


conleth

[conleth m3]

put some photos up in the photos section

https://nam3forum.com/forums/forum/csl-register/general/csl-photo-gallery/495752-sg-with-matt-black-td-s-on

cheers

conleth

[DuncanR]

Happy you sorted now mate ! :thumbs:

[conleth m3]

Happy you sorted now mate ! :thumbs:

cheers dunc, good spot on what the problem was mate :thumbs: