Factory delimit

[azrael]

Anyone know how many had the factory delimit?

Would quite like delimit but without the engine remapy stuff, know if its possible?

[shimmy]

Anyone know how many had the factory delimit?

Would quite like delimit but without the engine remapy stuff, know if its possible?

I guess you could see if Evolve have a map from a CSL that had factory delimited option.

Or ask them to do a standard map with delimit. I think they might by now know which part of map to change

[Neil M]

I think the delimited version is achieved using a different factory map, more bhp, more torques, faster 0-62 and higher top speed (actual figures however remain unknown).
Like with the cups, first owners had to sign a waiver, agreeing that they understood terms and conditions upon purchase.

The easiest way to achieve this (IMO) would be to download the complete map from an original factory delimited, then upload and replace your existing, if you had the necessary equipment and expertise.

'lawsy' might be in the know or other Indi, I don't think a Dealership would do it for you?:thumbs:

[CraigMillwardCroft]

Who could tell you if it has been done

[s.mac]

Mines been done, the dealer should be able to tell you.

[CraigMillwardCroft]

Mines been done, the dealer should be able to tell you.

I am sure when I asked Gareth he could not tell me, will ask again Monday when car goes in for subframe fill and AP fluid change :thumbs:

[Bounce]

I think Grant has had his done,Give him a pm Steve.

[Neil M]

Who could tell you if it has been done

If the car was supplied factory delimited then the build spec for the car should tell you.
If you haven't got a copy then go to this site and enter the last 7 digits of the Vin to obtain the build sheet: http://www.rubmw.ru/vincode/eng/:thumbs:

[alexk]

A few guys in the US are running my de-limited map.
Actually you could do it on your own, they have the scripts ready that calculate the checksums.

[alexk]

Now that I think about it, if you help me I could help you too on how to do it.
I just want your original limited map
Then we can prove if the theory that de-limited CSLs have more bhp is true or not.

[_Nathan_]

Mine was delimited, made 349bhp on the Simpsons dyno, I don't think they did anything other than remove the limiter.

[NBTBRV8]

Anyone know how many had the factory delimit?

Would quite like delimit but without the engine remapy stuff, know if its possible?

This thread will tell you how many were delimited:

https://nam3forum.com/forums/forum/csl-register/csl-register-main-discussion-centre/422329-the-csl-production-data-thread

BMW should still be able to delimit it for you if you have a racing licence.