rear wheels on the front

[cslsuperfan]

Rob,

I have run rears all round since simpsons altered my front camber.... no inner arch rub but it still tramlines like a bitch on any worn road surface.

15mm spacers with oem fronts are the best compromise as the tramlining can snatch the wheel if you're noddying.....:smokin:

Ben,

What was your outcome in the end?

Do you run 19" rears all round all the time or only on special occasions? :wink:

Rob

[glendog74]

Rob,

I have run rears all round since simpsons altered my front camber.... no inner arch rub but it still tramlines like a bitch on any worn road surface.

15mm spacers with oem fronts are the best compromise as the tramlining can snatch the wheel if you're noddying.....:smokin:

Cool - cheers mate :beer:

[billyboysm3]

Id go for it, I prefer driving it with no spacers at the front and -3.30 camber.

[glendog74]

Id go for it, I prefer driving it with no spacers at the front and -3.30 camber.

Yeah - that's what i'm now gonna do. Probably gonna sell my BBS wheels as i prefer the look of 19" sets.

[billyboysm3]

Im going to get mine back to standard colour then stick some new cups on.

Ben you got any pictures?

[cslsuperfan]

Im going to get mine back to standard colour then stick some new cups on.

Ben you got any pictures?

Post 8 on this thread ...a few pics of rears on the front

[alexk]

Any updated photos by anyone ?
To show better the whole car with the square setup :thumbs:

[englebert]

Sorry to bring an old thread back up from the dead, but does a square setup and the aggressive camber people spoke about (3 degrees or more) require aftermarket top mounts etc.?