Front Propshaft Coupling?

[shimmy]

What does it look like, where does it go, and how much to change.

What else should I do when down there

Thank you.

[O'Neill]

What does it look like, where does it go, and how much to change.

What else should I do when down there

Thank you.

See Gareth or Ant, easy

[Neil M]

What does it look like, where does it go, and how much to change.

What else should I do when down there

Thank you.

Like this:

The part should be about £45 but the labour might be a tad more expensive :thumbs:

[Neil M]

Where it fits in the scheme of things:

[adem.csl]

You also need a strip of butyle tape because you need to lower the centre bearing to get the doughnut off.if you don't you may get vibration like i did had to buy the tape to mount centre bearing all was good after.i can fit it if you want it done local

[J2LTB]

Shimmy I replaced my prop coupling and centre bearing myself. I used a Lemforder part from euro car parts. The car drives loads better from stand still. Must have been flexing. BMW quoted me £600 to replace just the coupler. I did that and the centre bearing for just over £100 .

[shimmy]

Shimmy I replaced my prop coupling and centre bearing myself. I used a Lemforder part from euro car parts. The car drives loads better from stand still. Must have been flexing. BMW quoted me £600 to replace just the coupler. I did that and the centre bearing for just over £100 .

:beer:

[Chrisc]

They are not that hard to do, and a common wear item unfortunately.

Why do you think yours needs replacing?

[shimmy]

Shimmy I replaced my prop coupling and centre bearing myself. I used a Lemforder part from euro car parts. The car drives loads better from stand still. Must have been flexing. BMW quoted me £600 to replace just the coupler. I did that and the centre bearing for just over £100 .

Sorry, no PM yet aout when you are popping round to do mine :beer:

They are not that hard to do, and a common wear item unfortunately.

Why do you think yours needs replacing?

The Grand PooBaa Giraffe of Elms says its fooked :whistle:

[J2LTB]

Sorry, no PM yet aout when you are popping round to do mine :beer:

Get your spanners and lump hammer out only takes errrr 8 hours
Im busy with vanos rebuild and head gasket. :banghead:

:thumbs:

[shimmy]

well here is the old one with 3 big splits ...