Donington Park track day Sunday 26th February

[Curly]

What time is everyone at the diggs

[O'Neill]

LOL aren't we back to 5mm spacers ......

Na the wheels are et35:thumbs:

[shane@mbtech]

They weigh about 2.5 kg a wheel more and don't look oem:bigcry:

Neither do 18" copies??

[s.mac]

Na the wheels are et35:thumbs:

I missed that :whistle:

[O'Neill]

Neither do 18" copies??

Arc8 8.55kg, td pro race 1.2, 11.5kg, nearly 3kg difference:bigcry:

[Yanto_csl]

What time is everyone at the diggs

1800 - last in bar buys. Assuming these gayers sort out their spacers :gayfight:

[O'Neill]

What time is everyone at the diggs

Leaving home about 15:00 should be there about 16:30/17:00:beer:

[shimmy]

What time is everyone at the diggs

1800 - last in bar buys. Assuming these gayers sort out their spacers :gayfight:

I'm seeing my dad 4-5 Bedford so should be there before 6.30.

[shane@mbtech]

Arc8 8.55kg, td pro race 1.2, 11.5kg, nearly 3kg difference:bigcry:

I meant they are not OEM.

I used TD pro race 1.2 with yoko A048 on my car. They saw me lap Oulton in 1.56. I dont think by changing them to Arc8 8.55kg, fandangos it would get me below 1.55. .

I get the theory and your thinking and going lightest is theoretically best, but in the real world, I doubt you will notice no difference in your lap times.

Far too many variables to go with.

On the rotational mass theory, who makes the lightest discs?

[O'Neill]

I meant they are not OEM.

I used TD pro race 1.2 with yoko A048 on my car. They saw me lap Oulton in 1.56. I dont think by changing them to Arc8 8.55kg, fandangos it would get me below 1.55. .

I get the theory and your thinking and going lightest is theoretically best, but in the real world, I doubt you will notice no difference in your lap times.

Far too many variables to go with.

On the rotational mass theory, who makes the lightest discs?

Arc8s function and form:thumbs:, square setup for tyre longevity, but difference in handling might take a while to adapt. As for lightest discs, must be ap because of alloy bells

[s.mac]

As for lightest discs, must be ap because of alloy bells

yes but their bolts are discs are heavier than others.. fact







:whistle:

[s.mac]

I understand getting the car to handle how you want it to but lap times??
you can't over take on corners, you go flat and I'm mean flat, there's always the chance of your car going home on Dunc's trailer. I see track days as a bit of fun and yes driving quickly, if you want to go any further then you need to race, even then to be up there I think you need very deep pockets if you want to be up at the front

[s.mac]

1. shimmy
2. Yanto
3. Steve Fitz
4. EVLXGE Bringing a fit bird and fat mate from work
5. Curly 1/2 day,won't give tutition not enough time :whistle:
6. Lawsy and MBtech crew (booked)
7. AlexGTt 8. Fit bird and Barry
9. conleth
10. terryb
11. smac

Turning up for pass laps

Northern Jim
Phil
Giraffe (bring your tools) :hahaha:

[shimmy]

I understand getting the car to handle how you want it to but lap times??
you can't over take on corners, you go flat and I'm mean flat, there's always the chance of your car going home on Dunc's trailer. I see track days as a bit of fun and yes driving quickly, if you want to go any further then you need to race, even then to be up there I think you need very deep pockets if you want to be up at the front

thats what racing drivers always say!

[s.mac]

thats what racing drivers always say!

I'm no racing driver mate :hahaha: a novice who wanted to have a go, some would say a :clown: :hahaha: