Announcement

Collapse
No announcement yet.

Would you buy a Euro E36 M3 as an enthusiast?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Would you buy a Euro E36 M3 as an enthusiast?

    As regulated by the NHTSA, 25 year old or older cars are legal for import into the US.



    Let's say a few years from now, some Euro E36 M3 (3.2 S50B32 in particular) are available in the US market as collector cars, as an enthusiast you are looking to collect an E36 M3. There are two choices in front of you:



    1) 1998 US E36 M3, Estoril Blue/Dove Gray, 5MT, S52B32, 240HP

    2) 1998 Euro E36 M3, Estoril Blue/Dove Gray, 6MT, S50B32, 321HP



    Assuming that Euro M3 is legally imported and can be registered. Both cars are in decent condition and under 100K miles.



    Question:



    1. Which E36 M3 would you buy?

    2. How much more are you willing to pay for the Euro E36 M3?



    Please feel free to share your thoughts and views on this!

    #2
    Not sure how serious you are, but I take it you are.


    If everything is equal, condition, color, etc, who wouldn't pick the Euro version?


    The only reason I could imagine, is that is harder or impossible as I sometimes read, to obtain spare parts.


    But it won't be untill 2021 that the first MY of the S50B32 reaches 25 years. It will be the 3.0 version for the first couple of years from now.

    Comment


      #3
      Originally posted by M_Parallel
      Not sure how serious you are, but I take it you are.



      If everything is equal, condition, color, etc, who wouldn't pick the Euro version?



      The only reason I could imagine, is that is harder or impossible as I sometimes read, to obtain spare parts.



      But it won't be untill 2021 that the first MY of the S50B32 reaches 25 years. It will be the 3.0 version for the first couple of years from now.
      Agreed! Spare parts could be a problem, especially for mechanical and electrical parts but the rest are pretty much the same.



      I would be willing to pay 20-30% more for an Euro E36 M3 but not sure if that is too low or high? Now a clean low milage US E36 M3 could cost more than 15K+ or even more. Can't imagine how much the Euro E36 M3 would cost if they are available by then.

      Comment


        #4
        The euro e36 is probably already 25-35% more all things equal. Add the cost of importation to that. At that price, I'd likely be saving a bit more and buying a Porsche.

        Thats not to say it hasn't been worth it, and won't be worth it again due to changes in the market, and currency fluctuations.

        Comment


          #5
          As someone who has an S50B32, I can say that it's an enormously more satisfying motor.


          Because of the S52's gruntiness, it's probably not actually that much better around town, but taching out the euro motor is nice. And there is nothing like a cable throttle ITB engine.

          Comment


            #6
            Originally posted by warez
            Agreed! Spare parts could be a problem, especially for mechanical and electrical parts but the rest are pretty much the same.



            I would be willing to pay 20-30% more for an Euro E36 M3 but not sure if that is too low or high? Now a clean low milage US E36 M3 could cost more than 15K+ or even more. Can't imagine how much the Euro E36 M3 would cost if they are available by then.
            Seeing the price hike the last few years on Euro M3's here, by the time they become legit for US import, after import, shipping, registration, it could be unobtainium.






            Originally posted by nrubenstein
            As someone who has an S50B32, I can say that it's an enormously more satisfying motor.



            Because of the S52's gruntiness, it's probably not actually that much better around town, but taching out the euro motor is nice. And there is nothing like a cable throttle ITB engine.
            Can't but agree.



            But S52 grunty or not, the S50B32 makes more torque at any rev than the S52B32.



            So that grunt is all relative compared to the top end.



            Keep in mind the S50B32 makes, thank double vanos for that, over 236 ft-lb of torque from 2600-6200rpm, peaking at 258 ft-lb at just 3250rpm.

            Comment


              #7
              I'd be willing to pay about $5k more for the Euro. I used to dream about importing one, but now I think I'd rather have an imported Skyline instead and keep my modded US E36.

              Comment


                #8
                In California, the Euro spec cars will never be able to pass smog legally without major modifications, the process of which would ruin "collector" status. Because of that, I would take the same lump of cash and build a S54 CA State BAR Certified swap and upgrade other aspects of the chassis to mimic or improve upon Euro spec performance. This is assuming you'd want to actually drive the car and not just look at it.


                Or, get a P.O box in Arizona...

                Comment


                  #9
                  Originally posted by Sammyzuko
                  I'd be willing to pay about $5k more for the Euro. I used to dream about importing one, but now I think I'd rather have an imported Skyline instead and keep my modded US E36.
                  I think $5k isn't going to cut it. Not even a slice.

                  Comment


                    #10
                    Eh, I'd rather have an old 911SC.

                    Comment


                      #11
                      Originally posted by M_Parallel
                      I think $5k isn't going to cut it. Not even a slice.
                      Haha....well I'm sure the Euro is nice, but I don't feel like I'm missing too much with my modded S52. There are other cars I'd rather have for the money you're hinting at.

                      Comment


                        #12
                        If cars were identical, i'd just go for the US version. Assuming the intention is collectibility then performance comes secondary. You'll have a much easier time finding a nice US example because the Euro cars are more scarce. Plus the logistics of actually acquiring it (exchange rate, transportation, inspection, etc) will be more work. Arguably you're better off spending that money on a car you'll be able to enjoy more.


                        The only car i'd consider importing is a GT. But they are Porsche money now, so all things considered you weigh all options when it comes time to write a check...

                        Comment


                          #13
                          Less than two year until GT's are eligible and I would absolutely import a well preserved/maintained version, even if it's past collector status.

                          Comment


                            #14
                            Originally posted by BlackHawkRacing
                            Less than two year until GT's are eligible and I would absolutely import a well preserved/maintained version, even if it's past collector status.
                            Expect to pay no less than $60k plus all the shipping and fees. Some are above 100k.

                            Comment


                              #15
                              Originally posted by Braymond141
                              Expect to pay no less than $60k plus all the shipping and fees. Some are above 100k.
                              Yup well aware of the price tags. Actually started looking around about a year ago.

                              Comment

                              Working...
                              X