milky dipstick after new headgasket

[m3f_Ajcanadian]

Then you grossly did something wrong. Even shorted 10-30 degrees, I would expect it to seal.



Do your compression test again.

Got bored, did a compression test. All 6 cylinders were over a 200 and were close to each other. Did my first top end rebuild at 17. I'm proud of myself

[m3f_propchef]

You had me at milky dipstick.


Good luck OP. Listen to Braymond

[m3f_Ajcanadian]

You had me at milky dipstick.


Good luck OP. Listen to Braymond

Hahahha, I guess we learn from our mistakes. Now that I think about it more. I really didn't tighten the cylinder six bolt properly. I slacked off on that one since it was hard to get.


Braymond is really a wealth of knowledge. I've come far and did this because of him. Thanks, Braymond!

[m3f_bluptgm3]

Cylinder 1 at the radiator, or cylinder 1 at the fire wall/cowl, which is cylinder 6.…


Sent from my iPhone using Tapatalk

[m3f_Ajcanadian]

Cylinder 1 at the radiator, or cylinder 1 at the fire wall/cowl, which is cylinder 6.…


Sent from my iPhone using Tapatalk

My mistake still messing this up.