MSS60 XDF Mappings

[KClemente]

Does anyone have a 240e full and partial bin? My M3 is running an old 80E firmware and I'll wait a bit before I upgrade. I've started my development on a polished and sorted XDF for the full bin 240E and some 80E. I've got the basics of each category so far besides the elusive fueling maps. I'll publish my results and changes on github as soon as it gets to a workable level

[dmlf]

I have used the prototype for some map yep, but if you look at the number of revisions in the funktionrammen, no doubt that many block diagrams are completely different.
in prototype, servotronics are 10x1, in funktionrammen from 2011 ( valid for 240e) : 16x1. no wonder I couldn't figure out servotronics in my 240e before having the funktionrammen

[terra]

I think someone posted a prototype A2L with matching binary somewhere in this subforum. That's probably a better starting point for making an XDF. Then use the funktionsrahmen to understand how the maps work together if it's not immediately obvious.

The prototype is early enough in development that it seems to be EWS3 based rather than EWS4. It does flash fine to an RSA-deleted MSS60, but I have no clue if it would actually run a car.

[dmlf]

Using the funktionrammen I was able to find servotronic, pedal maps, ignition coils dwell, RPM limiters ( cold / hot ), Speed limiters ...
I'd love to share but only with people willing to contribute, tuners have been holding knowledge for too long on this platform in my opinion and I'd like to open the vanes once we have a comprehensive free alternative.

[MpowerE36]

I'll need ZUSB numbers so I can search my hdds and dvds. Or if you know which Progman version this came in, then I can digup the corresponding dvd and get the required .0pa and .0da

Would it be possible to share all your .0pa and .0da files ? I will open each one and read the description at the beginning of each file. Thank you

[demos]

Hi demos,

All SP DATEN are welcome for sharing but we are looking for a M3 GT4 one or binary file because we thing that it has an oem immo off

I'll need ZUSB numbers so I can search my hdds and dvds. Or if you know which Progman version this came in, then I can digup the corresponding dvd and get the required .0pa and .0da

[MpowerE36]

Got lots of them which number(s) do you want? I think it was EWS4 not 3. MSS65 was EWS3

Hi demos,

All SP DATEN are welcome for sharing but we are looking for a M3 GT4 one or binary file because we thing that it has an oem immo off

[demos]

Here MSS60 SP DATEN I found but all have EWS3 activated. Maybe someone has more MSS6x SP DATEN ?

https://1drv.ms/u/s!AoYWDjVCL5J4gSDj...yZ6vx?e=sRr9Lj

Got lots of them which number(s) do you want? I think it was EWS4 not 3. MSS65 was EWS3

[demos]

So happy to find this thread/forum. I've been trying to achieve some of these goals since 2011. All while juggling work/family/home...etc. I eventually gave up.🙄
Off the top of my head I recall there were 3 or 4 authentication levels. Flash auth involved a 3des number in SGIDC.as2, and the DME's serial number and a random logon number (seed/challenge response). I used IDA as well as Olly running live while flashing mss60 and mss65. I'll dig up old docs/pics. I remember I was focused on the 512kb UC3F_Flash and 2Mb external flash of injector side. Also I noticed that even old unlocked MSS60 when being updated they got automatically locked. Just like when BMW updated CAS they automatically SOPTed them. Guys....where were you 9 years ago when I needed you?

[terra]

Ha I haven't been working with the Fxx cars too much, but I never say no to a motorsports binary :P

Good to see you here Mark!

[MarkD_M5]

Long shot, but anyone here have access to M3 GT4 software? Wondering if those have a factory EWS Delete.

I didn't read an M3 GT4, but I do have a read for an F87 M2 (read with Femto) if anyone wants that. I'll zip it and make it available on my dropbox if anyone wants it.

[alfalfa]

Long shot, but anyone here have access to M3 GT4 software? Wondering if those have a factory EWS Delete.

That is exactly my actual though. But I didn't find a 0da or a read of this Software.

[MarkD_M5]

Is it a UK to Russia issue? Would US to Russia work?

Canada to Russia works for both those vendors. Ask me how I know.

[Martyn]

I think it’s something to do with my account being a business account rather than a personal one.

[MarkD_M5]

I tried to buy the MSS60 funktionsrahmen from JMGarage this morning but my PayPal account won't let me send money to Russian addresses

That's odd, I have sent him $ via PayPal in the past, actually just 2 months ago. I know him well and chat over Skype at least once a month.