WHEEL SPACERS?

[Bellaxu]

Nixed.

[BMWE46M3]

While they're not forged, I've been very pleased with Turner's spacers.

[Tbonem3]

I like KSP (on ebay/amazon) They look to be the supplier to Apex, just judging off the design of the spacer.

[repoman89]

Guys OP is obvious spam plugging a product.

[gheorghe]

I like KSP (on ebay/amazon) They look to be the supplier to Apex, just judging off the design of the spacer.

I just installed the KSP spacers on the front and am happy with them, good product

Also agree with repoman89, looks like he's spamming his company's product.

[r4dr]

I like KSP (on ebay/amazon) They look to be the supplier to Apex, just judging off the design of the spacer.

Oh wow, good find.

[Pavlo]

Information for those wondering:

1. Aluminum stiffness (modulus) is nearly identical for all the aluminum alloys, so there is little to no benefit of a stronger alloy in a spacer. Wheel adapters on the other hand it matters a lot as your wheel attaches to them.

2. You can forge a pile of crap and still have a pile of crap; it is meaningless without actual material properties or tests.

H&R are some of the best out there and very reasonably priced.

[Tbonem3]

Oh wow, good find.

Ya! I have 12mm and 15mm for the fronts of my 2 Ms. They're very high quality, very light. Paid under $60 for both sets! (No lugs).

[r4dr]

Ya! I have 12mm and 15mm for the fronts of my 2 Ms. They're very high quality, very light. Paid under $60 for both sets! (No lugs).

I found their eBay listings, do they not come with lugs? Photos seem like they do, but I couldn't tell for sure.

[Tbonem3]

There are 2 separate listings I've seen, with and without lugs. What makes it tricky is that some are on ebay, some are on amazon. The pricing is usually around $35 for the pair alone and closer to $50 for the pair with lugs.

Here are the 15s I got:

https://www.ebay.com/itm/283645030964?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

I stared long and hard at them and Apex's pictures. They look identical.

[Mattn1192]

Bought rogue engineering 12mm spacers front and rear. With lugs. Been good so far

[Estoril]

Guys OP is obvious spam plugging a product.

Google him and "wheel spacers". He is all over every possible marque board acting as both clueless neophyte asking for advice AND expert recommending that same brand. A transparent, self-serving purpose.

[Obioban]

Banned the op and deleted his post, but kept the thread since good things came of it.

[Phoenix///M3]

I run H&R on my X5. Extremely high quality product.

Sent from my SM-G950U using Tapatalk

[timmo]

Found a good deal on barely used 12mm Motorsport Hardware Traklite spacers off E46F, no complaints from me. Bonus is that I can claim that I'm faster with all the speed holes 🤣