How to buy Vincebar?

[BMWE46M3]

So I see there is a site via Facebook under Practical Performance RnD, but how do you actually order the kit? Any help would be appreciated. Thanks...

[Slideways]

The FB messenger works or by email - vincent@practicalperformance.se

[poss]

I tried to contact Vince via FB when I was after this solution. No response. Did it myself for a fraction of his price.

If you are looking at welding the bar in the fabrication is pretty basic. If you can cut and weld steel make it yourself - or get the installer to fabricate.

[BMWE46M3]

He hasn’t replied to me email either and unfortunately I can’t weld and want to complete this project myself so I think my only solution is the Vincebar kit so I can rivet everything.

[VinceSE2]

He hasn’t replied to me email either and unfortunately I can’t weld and want to complete this project myself so I think my only solution is the Vincebar kit so I can rivet everything.

I’m sorry I seem to have missed your message somehow, can’t find it in my inbox.
How can I help?


Sent from my iPhone using Tapatalk

[VinceSE2]

I’m sorry I seem to have missed your message somehow, can’t find it in my inbox.
How can I help?


Sent from my iPhone using Tapatalk

This is copied from this post: https://www.facebook.com/72205743465...709238764/?d=n


Firstly, when you are ready to place an order, please send me an email at vincent@practicalperformance.se

The subject should be “Order”

In the body of the email please provide the following:
•Your name and shipping address
•The email address to which you’d like to receive the PayPal invoice (any address will work)
•A phone number
•What items you wish to order
-For example: The simplified Epoxy/Rivet-in Vincebar kit and, if you so choose, the tooling kit.

Please note:
The prices posted do not include sales tax/VAT.
On orders within the EU I’m obligated to add the 25% Swedish sales tax/VAT. On orders outside the EU the buyer is responsible for any and all local taxes.

Current product list:
(Please find more information in the picture descriptions below)

1. VinceBar/RACP related products

• 1.1 Simplified design Epoxy/Rivet-in VinceBar kit
✅ In stock 5750 SEK

• 1.2. Simplified design Weld-in VinceBar kit
✅ In stock 5750 SEK

• 1.3. Simplified design Weld-in VinceBar COMPONENTS kit
✅ In stock 3500 SEK

• 1.4. Stealth design (original) Weld-in VinceBar kit
✅ In stock 5750 SEK

• 1.5. Stealth design (original) Weld-in VinceBar COMPONENTS kit
✅ In stock 3500 SEK

• 1.6. Stealth design (original) Epoxy/rivet-in VinceBar kit
❌ Made to order, Currently not in stock 6000 SEK

• 1.7. VinceBar tooling kit - Epoxy/rivet-in version
✅ In stock 700 SEK

• 1.8. VinceBar tooling kit - Weld-in version
✅ In stock 700 SEK

• 1.9. Front gusset cup kit - Epoxy/rivet-in version
✅ In stock 1750 SEK

• 1.10. Front gusset cup kit - Weld-in version
✅ In stock 1750 SEK

• 1.11. BUNDLE Front gusset cup AND tooling kit - Epoxy/rivet-in version
✅ In stock 2250 SEK

• 1.12. BUNDLE Front gusset cup AND tooling kit - Weld-in version
✅ In stock 2250 SEK

• 1.13 Extended stud and bolt kit
✅ In stock 800 SEK

1.14 Extra long extended stud and bolt kit options
❌ Out of stock 900 SEK


Sent from my iPhone using Tapatalk

[Pklauser]

Just to share my experience here: I've ordered a bar and components from Vince, most recent being a month ago. Both times had quick responses and fast shipping.

[jet_dogg]

I tried to contact Vince via FB when I was after this solution. No response. Did it myself for a fraction of his price.

If you are looking at welding the bar in the fabrication is pretty basic. If you can cut and weld steel make it yourself - or get the installer to fabricate.

Ya seems simple to make for under a couple hundred.

[Obioban]

There's a fair number of fairly specifically shaped and bent pieces to get maximum contact. If you're handy, you could certainly make something similar, but it'll likely be not insignificantly worse, and the vincebar is pretty reasonably priced.

Plus, IMO there's value in supporting the person that actually engineering a solution to the chassis' underlying issue, instead of just band aiding/moving the issue like all the solutions before it.

[Pklauser]

Yea I fabbed one myself on one car and bought the real thing for a second. I'm sure my fabbed one will hold up fine, but since a shop was doing the second install it was way easier to be able to hand them the kit and know that at least that part of the construction was going to be solid.

[WestBankM4]

Just to share my experience here: I've ordered a bar and components from Vince, most recent being a month ago. Both times had quick responses and fast shipping.

You're not going to mention that tasty bag of Alghrens bilar?

[Pklauser]

You're not going to mention that tasty bag of Alghrens bilar?

Lol, I have yet to indulge in the Swedish treat, I haven't had great experiences with pastel-colored candy

[WestBankM4]

Lol, I have yet to indulge in the Swedish treat, I haven't had great experiences with pastel-colored candy

Curious, did you purchase the weld in kit, or the epoxy/rivet kit?

[Hammerfang]

Interested in buying one of these. Any recommendations between the welded vs epoxy version?

[JokerElite]

Interested in buying one of these. Any recommendations between the welded vs epoxy version?

Welded is usually recommended over epoxy.