The carbon slicktop thread

[sc_tr0jan_m3]

TC design is the first shop that comes to mind. Though I’m sure others are capable (performance technic, VTmotorwerks, edge)

Maybe DanAvoN7 would be down to tackle this?

All good shops. You can’t go wrong w any of them.

TCD would use something more race car oriented so it may not have the polished look and a nice thick clear coat but it’d have the weight savings. My car’s in the shop for a bunch of work including a cf roof.


Sent from my iPhone using Tapatalk

[Daniel]

Anybody know a good shop in the Bay Area that can or has done this?

Also did the group buy ever happen?

Found a crack in my windshield and I've always wanted a CF roof, so this might push me there.

TC design is the first shop that comes to mind. Though I’m sure others are capable (performance technic, VTmotorwerks, edge)

Maybe DanAvoN7 would be down to tackle this?

[ra2fanatic]

May I have the ballpark of the total cost of slicktop conversion, including parts and labor? Thanks!


Sent from my iPhone using Tapatalk

As I posted a few pages back....

RKP Roof: $1490
OEM Roof Bow: $116.46
CSL Headliner: 598.57
CSL Roof Molding: $524.55
Alcantara Headliner and Pillar Wrapping: $550
Sealing Gaskets: $83.01
Sound Dampening Material, 20sq ft: $117.17
Heat Insulation: Second Skin Mega Zorbe, 8sq ft: $137
Windshield: $437.53
Labor: $1500

[kreyes52699]

May I have the ballpark of the total cost of slicktop conversion, including parts and labor? Thanks!


Sent from my iPhone using Tapatalk

[jet_dogg]

I think if I had an AW/Silver/Black/IB I might roll with a CF roof, but for PY/Imola/LSB the roof body color looks better IMHO. Somebody posted some pictures of a slicktop conversion done on an Imola on M3F just before the site when down and it looks fan-fn-tastic.

Personally grown tired of the stark contrast of black trim (or cf) with light colors these days and do prefer subtle shades like a cf roof on a black car. Fortunately I don't have to worry about any of that because my car is sunroof-less from the factory

[wahsm]

Anyone done the M4 style CF roof from Karbonius? Not sure how I feel about the look. Would be nice to see some pictures other than what they have on their site.

https://karbonius.net/producto/bmw-m3-e46-structural-roof-panel-m4-style/

[CAL M3]

Anybody know a good shop in the Bay Area that can or has done this?

Also did the group buy ever happen?

Found a crack in my windshield and I've always wanted a CF roof, so this might push me there.

[Lip]

I will be getting one soon and I’ve talked to three shops in SoCal (2M, EAS and Lang). They all make or carry carbon roofs and do installs. If interested and are local, let me know and maybe we can get a better deal. Not a group buy but maybe 3 of us can get some sort of discount.

im personally looking to get it done by June this year.

I can go in for installation only if that helps. Just waiting on the additional parts for installation

[Slonik]

guys, my thoughts with my experience

due to the overall installation process cost, i'd prefer to concern about final quality of the roof.
as i see this upgrade, 300 or 500$ price change would not make you happy, if the roof will looks like shit at the end.
i'm not about internal, hided specs, which most of you wouldn't feel and forget right after roof will be installed. i'm about external view of the roof.

all carbon fiber looks the same only when you see it for the first time, "squares and squares doesn't matter". difference comes when you start to compare side by side one with another.
and main issue (for me), that it's like "don't think about elephants". once i get some knowledge, i can not goes back and forget it.

so i'm crazy about weight, rigidity and all this shit, but exactly on the roof - it MUST looks super perfect. yeah, the trunk or wings also must be perfect, but only before you will cover this pattern under layer of paint.

issue of the carbon fiber parts, like the roof for example - that it must be done perfect from the begin and on all stages. if it doesn't - sometimes even 5 or 6 times recoating (and yes, it's a huge labour time/money) it with the lacquer, you wouldn't get perfect result.

so i think you are concern about little bit wrong things.

[Actuary]

I will be getting one soon and I’ve talked to three shops in SoCal (2M, EAS and Lang). They all make or carry carbon roofs and do installs. If interested and are local, let me know and maybe we can get a better deal. Not a group buy but maybe 3 of us can get some sort of discount.

im personally looking to get it done by June this year.

[Lip]

Whatever happen with a possible group buy?

Probably not happening given how busy they are. For everyone’s sake, I hope they allow someone to run it soon.

Personally, I grabbed one from Karbonius directly.

[selm3]

Whatever happen with a possible group buy?

[nextelbuddy]

Did you do the install yet? Which did you end up using more?

nope I haven't yet, I have a sedan so I have to wait for somebody to make my carbon fiber roof I'm just getting prepared because I'm waiting for one to get done.

[Tonggi]

It's just a different type of bit the one from the third link.I wanted to make sure I had a backup option in case something weird happened with the first option. also the bit from the third option is an 8 mm wide bit I believe whereas the one from the first option is closer to a 10 mm. So I like having both options to see which I like better

Did you do the install yet? Which did you end up using more?

[nextelbuddy]

Curious what is the point of the third link you sent if I get the first link with the whole kit?

Thanks for hte links. I will add to my wishlist!

It's just a different type of bit the one from the third link.I wanted to make sure I had a backup option in case something weird happened with the first option. also the bit from the third option is an 8 mm wide bit I believe whereas the one from the first option is closer to a 10 mm. So I like having both options to see which I like better