The carbon slicktop thread

[BMWahba]

Interesting, I wonder if someone can mock up those spacers and that might work the same.


Sent from my iPhone using Tapatalk

[Onefastsicilian]

Yep, epoxy is the most logical solution. Unless we could design a 3d printed spacer or something that the rails could adhere to that are then taped to the roof rail. Do the OEM CSL rails use double sided tape?


Sent from my iPhone using Tapatalk

yes, if you look at the pictures on ECS, they show you where the double sided tape makes contact.

https://www.ecstuning.com/b-genuine-...137897925~geb/

[BMWahba]

Yep, epoxy is the most logical solution. Unless we could design a 3d printed spacer or something that the rails could adhere to that are then taped to the roof rail. Do the OEM CSL rails use double sided tape?


Sent from my iPhone using Tapatalk

[Onefastsicilian]

I have this exact same predicament, some have recommended me to use double sided tape, but I tried and can't get enough contact.

Thats the issue.. Then, we could epoxy a small spot to hold it down but when I end up getting csl rails, how much of a pain will it be to pull up lol

[BMWahba]

for all of you who didnt buy the CSL roof rails, how did you guys attach the factory one from your car to the roof?

the metal roof has tabs that it attaches too and the CF roof now doesnt. Trying to figure how I can attach these things so they dont fly off.

I have this exact same predicament, some have recommended me to use double sided tape, but I tried and can't get enough contact.

[Onefastsicilian]

for all of you who didnt buy the CSL roof rails, how did you guys attach the factory one from your car to the roof?

the metal roof has tabs that it attaches too and the CF roof now doesnt. Trying to figure how I can attach these things so they dont fly off.

[robgill]

where did you purchase your roof from? looks clean. is that 1x1 weave??

Its a Challenge roof 2x2. VERY nice weave and absolutely no flaws. Was pretty straight forward to install. I had the car repainted so it also has fresh clear coat and polish.

[Jimmy_L]

Work in progress

where did you purchase your roof from? looks clean. is that 1x1 weave??

[robgill]

Work in progress

[TheSt|G]

Cool mod, bit of a steep price for 52lbs and an inch of headroom, but I get it.

Definitely more than an inch, I would guess at least two.

[akshon]

Any decent body shop can do this. Its more time consuming than technically difficult. There is a lot of anxiety on spending this much money to rip off a perfectly good roof but looking at the roof everyday I have no regrets.

[Epsilon]

My Lang Racing Roof. Weave and fit is perfect, carbon is strong enough to stand on. Only problem is it did not come lacquered so had to do it myself.

Please share the details. Where did get it installed?

[akshon]

My Lang Racing Roof. Weave and fit is perfect, carbon is strong enough to stand on. Only problem is it did not come lacquered so had to do it myself.

[usdmej]

Hard to believe it's lighter-- the factory stuff is effectively weightless.

I could believe it works better.

have you ever held a magic eraser? the factory cotton jute is relatively much heavier

[Nate047]

Cool mod, bit of a steep price for 52lbs and an inch of headroom, but I get it.