The carbon slicktop thread

[fattycharged]

I’m awaiting their return from Holidays. I started listing their products on EuroConnex. I should have news 2nd week of Jan.

At checkout, shipping is "free", curious if this is correct

[heinzboehmer]

I’m awaiting their return from Holidays. I started listing their products on EuroConnex. I should have news 2nd week of Jan.

Is this is? Or are there plans for a separate group buy?

https://euroconnex.co/collections/e4...ral-roof-panel

[Epoustouflant]

Epoustouflant Anything from Karbonius about a group buy on the roof?

I’m awaiting their return from Holidays. I started listing their products on EuroConnex. I should have news 2nd week of Jan.

[0-60motorsports]

Anyone done the M4 style CF roof from Karbonius? Not sure how I feel about the look. Would be nice to see some pictures other than what they have on their site.

https://karbonius.net/producto/bmw-m...anel-m4-style/

That doesnt look bad at all!

[lvm3sm46]

Epoustouflant Anything from Karbonius about a group buy on the roof?

[Cronenberged]

TC design is the first shop that comes to mind. Though I’m sure others are capable (performance technic, VTmotorwerks, edge)

Maybe DanAvoN7 would be down to tackle this?

The first company to perform it isn't far from the bay, Bees something is all I can remember they're done quite a few. There's also a BMW performance.and repair shop near there that would be good at it. They're known for some crazy engine swaps.

[Epoustouflant]

Actively reading through this thread. Lots of great info.

I will definitely ping Karbonius to see if a winter GB on the roof could be possible.

It’s on my to do for the PY.

[Tonggi]

That looks amazing man, start to finish how long did it take and what DIY did you use? Looking to tackle this on my own next year.

I had a lot of time to prep by buying all the tools I needed and had downtime and waiting because I was taking my sweet time and waiting for certain parts to come in I found out last minute


Part 1: Prep (3 hours) Remove entire interior, seats, pillars, moonroof, headliner

Part 2: Drilling out spot welds and removing roof (4 hours) Remove the 4 nuts/washers holding the original, roof rack in place. this makes it easier

Part 3: Prepping roof with sander or angle grinder with the right piece to make sure its all clean (1-2 hours)

Part 4: Install bow this can vary depending on what you do.

Part 5: Prep the roof to have the epoxy(i brushed on everything that was exposed metal and install the carbon roof with clamps (1 hour) I had time so I let it settle for 36 hours

Part 6: Put windshield back

Part 7: Put interior back (1-2 hours)



The waiting from step to step is what took the longest and the drilling.

I watched AJ Hartman's DIY and some Munich Venom and some others DIY on forums and IGs but I combined them all together and used what I wanted.

[CrisSilberGrau]

My recent CF slicktop conversion and headliner/pillars reupholstered

That looks amazing man, start to finish how long did it take and what DIY did you use? Looking to tackle this on my own next year.

[Tonggi]

My recent CF slicktop conversion and headliner/pillars reupholstered

[Tonggi]

May I have the ballpark of the total cost of slicktop conversion, including parts and labor? Thanks!


Sent from my iPhone using Tapatalk

I'll post up photos soon.

DTM FIberwerkz CF Roof: $1100 shipped
CSL Roof Bow: $103
3m Epoxy and Epoxy Gun $100
Drill bits $20
CF Dremel Bit: $15
Headliner Used $400
Misc tools: $80
Headliner and Pillars wrapped in alcantara $450
Glass removal rear $135
Front Glass removal and replacement: Free CUZ FLORIDA BABEH
Rear Window Gasket $40
Labor:Free

[lastMleft]

Where did all the potential carbon fiber group buys go? I'm back on the hunt for a CF roof for the race car.

Does anyone have experience with Aero Function AR1 carbon fiber roof? Weight? Quality?

https://www.carid.com/aero-function/af-1-style-carbon-fiber-hard-top-roof-mpn-107637.html?singleid=81009577&url=450589

Feff

Go with RKP.

[sc_tr0jan_m3]

TC design is the first shop that comes to mind. Though I’m sure others are capable (performance technic, VTmotorwerks, edge)

Maybe DanAvoN7 would be down to tackle this?

All good shops. You can’t go wrong w any of them.

TCD would use something more race car oriented so it may not have the polished look and a nice thick clear coat but it’d have the weight savings. My car’s in the shop for a bunch of work including a cf roof.


Sent from my iPhone using Tapatalk

[Daniel]

Anybody know a good shop in the Bay Area that can or has done this?

Also did the group buy ever happen?

Found a crack in my windshield and I've always wanted a CF roof, so this might push me there.

TC design is the first shop that comes to mind. Though I’m sure others are capable (performance technic, VTmotorwerks, edge)

Maybe DanAvoN7 would be down to tackle this?

[ra2fanatic]

May I have the ballpark of the total cost of slicktop conversion, including parts and labor? Thanks!


Sent from my iPhone using Tapatalk

As I posted a few pages back....

RKP Roof: $1490
OEM Roof Bow: $116.46
CSL Headliner: 598.57
CSL Roof Molding: $524.55
Alcantara Headliner and Pillar Wrapping: $550
Sealing Gaskets: $83.01
Sound Dampening Material, 20sq ft: $117.17
Heat Insulation: Second Skin Mega Zorbe, 8sq ft: $137
Windshield: $437.53
Labor: $1500