Side Finisher Rubber Replacement and Rear Side Window Trim Replacement

[Maxima SE]

Might be able to get it cheaper if we did a GB not thru eBay. Seller would avoid the eBay seller fee.

I asked him if he has more than 10 available and he said he did and asked me how many I want. I can ask him about a GB off eBay. Directly through PayPal.

looks like about 20 people ?

[SQ13]

Might be able to get it cheaper if we did a GB not thru eBay. Seller would avoid the eBay seller fee.

[Slideways]

For SF Bay Area:
1 x me
1 x WestBankM4
1 x heinzboehmer
1 x Slideways

I'll take a set.

[PSUEng]

It would be freaking sweet if this guy would do a group buy and ship directly to each of us. I'm in Raleigh and would buy a set.

I'd be in for 1 set too based on what I'm seeing others say about the fitment quality.

[BMWE46M3]

It would be freaking sweet if this guy would do a group buy and ship directly to each of us. I'm in Raleigh and would buy a set.

[Epsilon]

I'd grab a set with you guys

For SF Bay Area:
1 x me
1 x WestBankM4
1 x heinzboehmer
1 x Need 1 more! <--

[WOLFN8TR]

Four at $140 each plus Tax which is approximately $45 for a total of $605.
Local pickup $151 each. I would assume around $15 to ship out to other members. Still a decent price at $166 each.

I would be interested in buying 4 or getting one from a group buy close to me.

[SQ13]

I'm in Houston, but I'd be in.

I go back and forth between HTX and ATX, and moving back to HTX at the end of the month for school. 🤙

[Maxima SE]

I messaged the ebay seller and was told that the rubber piece is made by the company that used to make it for BMW. So basically OEM quality should be expected

[I M Legend]

I received the pair of seals mentioned above ~ 2 weeks after ordering Will They appear to be every bit OE quality to my eye. Nice grade rubber and finish. I like the quality 3M tape that came attached to the pieces as well. The rubber seal as a whole is a little thicker than I expected, especially toward the H-kink. But I'm told by others that it should fit behind the molding just fine. Attached are a few pictures.

I find it interesting that there's no tape along the bottom end of the seal. Maybe it's held in place by the trim once all the screws are in or something? I'll reference Cubieman post above. These seals have a significant taper from the C pillar to the B pillar. So maybe there is hope for a perfect fitment.

I'll probably do this job within the next month. I'll be happy to report more at that time. Cheers!

Was there a part# on the packaging? As others have mentioned, the ad lists it as an OE part.

[WestBankM4]

Where did these Texas cats come from? Lol

Sent from my Pixel 7 Pro using Tapatalk

[eisen]

In for two sets, if any Texas peeps wanna join in.

I'm in Houston, but I'd be in.

[Maxima SE]

We could probably get a few locals together or even just us 2 and get the discount.

Yeah for sure. I am going to wait to see pics of them installed and reviewed. If they are promising then I definitely want to pick up a pair as a spare. Never know how long stuff like this is available for. At $140 a pair they arent that much more expensive than the 3M solution with all the tubing etc.

[heinzboehmer]

Anyone in the SF bay area interested in the discounted 4 quantity price of $139.30 + tax?

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2332490.m570.l1313&_nkw=225606622802&_sacat=0

I've bought the generic stuff, I actually purchased a few different styles to see which would fit best but haven't done the DIY just yet.

I'm more interested in getting a set of these that are already contoured, I'm in the East Bay and I'd definitely be down to join in with you.

I'd grab a set with you guys

[Estoril]

I'd be in for a discounted set