Ohlin RT guys: front wheel/tire sizes/offsets

[repoman89]

Spring perch location vs the tire also depends on your ride height and top hat choice, in addition to spacer vs no spacer. The spacers are almost a requirement to get a high enough ride height with the right amount of bump travel by the way.

I run 9.5 ET35 with a 265 Hankook RS4 on track and had no issues with the following setups, both at 13.5" hub to fender ride height and with the 3dm spacers:

- TMS Street camber plates, 400 lb Ohlins beehive spring
- (current) TMS Street camber plates with 2.5" spring perch, 325 lb 2.5" / 7.5" length springs

[Exclusivs]

9.5 ET22 with a 265/35/18 should work with the stock Ohlins RT. Adding the Ohlins front strut spacer (3DM Motorsport stocks them) will give more clearance and a 9.5 and 10 inch wide wheel with 275+ tire should clear without issue.

https://3dmmotorsport.com/products/b...rut-spacer-kit

Thanks for this .

Seems more “useable” solutions exist now for OHLINS RT vs few yes ago. Or guys just figured it out trial and error. Like Ian - [mention]Obioban [/mention] Followed his tribulations closely but think he moved on from it.

Any others?


Sent from my iPhone using Tapatalk

[Slideways]

9.5 ET22 with a 265/35/18 should work with the stock Ohlins RT. Adding the Ohlins front strut spacer (3DM Motorsport stocks them) will give more clearance and a 9.5 and 10 inch wide wheel with 275+ tire should clear without issue.

https://3dmmotorsport.com/products/bmw-m3-e46-ohlins-e46-front-strut-spacer-kit

[Exclusivs]

Ohlin R&T guys ,

What types of 9.5 , and 10 " front wheel AND tire setups are possible?

How limiting is the front conical spring?

TIA