Can’t seem to shift into reverse or 1/2 easily. Any tips? I reused the smg threads so there’s no downward bolts hitting the dssr. Haven’t bleed the clutch yet so I’ll do that today.
-
-
did you loosen the adjuster screw and center the shifter? -
Yea I did, which made the 1-6 shifts better but reverse is now popping out if I don't get it in right. Also sometimes 2nd grinds. Idk if my tranny is bad or install errorOriginally posted by Tonggi View PostComment
-
what mounts (Trans & motor)? For second gear issue. I have poly and it works perfect. I dont see how this could of been messed up. maybe loosen the 3 screws holding it and make sure it stays in reverse. Ive had no issue and the shifting was ev evn better when I adjusted using the screwOriginally posted by Rod.bearings View PostComment
-
Stock old motor mounts and Ecs tuning 70a tranny mounts. I am going to order some 80A engine mounts to give it a try.Originally posted by Tonggi View Post
Yea I can’t see it being messed up either, pretty straight forward install. Unless I messed something up with the bellhousing or tranny install when I deleted smg. I’ll try adjusting the 3 screws and position.Comment
Comment