Announcement

Collapse
No announcement yet.

Need some input on Transmission fluid

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need some input on Transmission fluid

    Swaping my e36 M3 from its 5 speed to the 420g 6 speed. It came shipped empty as expected. My sticker on the trans is the MTF-LT2,,, i have heard/read that this fluid is barely adequate for normal use. Bimmerworld recommends Red Line MTL-LV, was wondering what everyone else is using.

    On a side note, i will be using a sprung hub clutch, and light weight flywheel so i know there will be chatter.

    #2
    I use MTL and I barely ever hear my flywheel chatter. You can use the LV but I stick to MTL because I think it's a bit thicker. Shifts great and I actually just changed it after 20k miles and 4 years. It came out looking brand new and I beat on my car alot.
    This is my Unbuild Journal and why we need an oil thread
    https://nam3forum.com/forums/forum/m...nbuild-journal

    "Do it right once or do it twice"

    Comment


      #3
      I just put valvoline syncromesh in mine. Feels great, meets mtf-lt2. Had redline D4 for a week, gears were notchy so I thought it was the fluid but my cross member was loose too so that contributed.
      Last edited by Icecream; 04-23-2024, 07:16 AM.

      Comment


        #4
        thank you for the input

        Comment

        Working...
        X