Rear Quarter Glass - Noise/Play From Socket After Removal

[L0okitzRaj]

Hey ya'll.... I did my finisher window trims a while back, and in the process removed the quarter glass. I now notice a bit of play from that ball socket, which creates a clacking sound when my quarter windows are open. I've removed and reinstalled to inspect, but now it just looks like there is more play in there(ball/socket), not sure how it developed. I've double checked the quarter glass screws/bolts and everything is tight. Other side has no issues.

Anyone have any suggestions? do you think re-adjusting the quarter glass will help?

EDIT: SOLVED... as stated below, o-ring was missing from one side.

[Tbonem3]

Missing a washer?

[HennyM3]

Theres two small gaskets on each ball joint, yours must've slipped off, and is causing the extra play in the ball socket

[AWE46M3]

+1 ; there is a rubber o ring that goes around the ball joint. Yours is either missing or worn out.

Part # 67157006323

[L0okitzRaj]

Ahh shit. Thanks guys, I haven't looked but this make sense. Appreciate the quick responses.