Decent fitting CSL bumper (non kevlar bar)

[Epoustouflant]

Made in Germany: https://www.ebay.com/sch/i.html?_fro...60846&_sacat=0

I source it for less than that price.

[Acarv_426]

Is the Kevlar bar a straight swap, or are other parts needed to install it? My car has the aluminum bar, and the bumper for aluminum bar is NLA apparently. Thinking about switching to Kevlar.

I forget. I swapped out my Kevlar for the aluminum carrier years ago and am gong to be swapping back soon. It may be a straight swap if I remember correctly - I also need to figure this out. I may just reference REALOEM and order all new hardware just incase. Does anyone recall if we can use the euro washer bottle that is used with the CSL bumper for the euro m3 bumper? Or do I have to purchase another washer bottle for a non CSL bumper fitment such as those found on stock spec cars. It's been a while since I've messed with this bumper stuff. Thanks

[Epoustouflant]

I forget. I swapped out my Kevlar for the aluminum carrier years ago and am gong to be swapping back soon. It may be a straight swap if I remember correctly - I also need to figure this out. I may just reference REALOEM and order all new hardware just incase. Does anyone recall if we can use the euro washer bottle that is used with the CSL bumper for the euro m3 bumper? Or do I have to purchase another washer bottle for a non CSL bumper fitment such as those found on stock spec cars. It's been a while since I've messed with this bumper stuff. Thanks

This and this are good reads for you. The OEM hardware checklist is at the bottom of this.

You don't need an actual carrier to fit the OE CSL bumper and the 1:1 replica from Alsatek.

This is essentially all you need:

[Acarv_426]

This and this are good reads for you. The OEM hardware checklist is at the bottom of this.

You don't need an actual carrier to fit the OE CSL bumper and the 1:1 replica from Alsatek.

This is essentially all you need:

Appreciate it -Thank you

[DJAM3]

Is the Kevlar bar a straight swap, or are other parts needed to install it? My car has the aluminum bar, and the bumper for aluminum bar is NLA apparently. Thinking about switching to Kevlar.

The early Euro bumper is available at Schmiedmann. You just have to wait about a month or two to get it.